Digital Equipment Prioris Series Installatiehandleiding - Pagina 9

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Digital Equipment Prioris Series. Digital Equipment Prioris Series 15 pagina's.
Ook voor Digital Equipment Prioris Series: Handmatig (16 pagina's)

Pagina afdrukken

Run the Quick Launch CD-ROM program

Use the Quick Launch CD-ROM disk to complete the server

installation. Follow these steps to configure your server

and install an operating system.

NOTES

If your Prioris XLe 6000 Series Server does not have a

bootable CD-ROM drive, the following is not applicable.

Refer to page 11 of the Server Installation Guide for

information about how to create a Device Driver disk-

ette so that you may manually install your server oper-

ating system.

If you installed optional expansion card(s), you first need

to perform the instructions on the previous page.

Use Express Installation to install Windows NT or Net-

Ware operating systems directly from the Quick Launch

CD-ROM.

1. Locate the Quick Launch CD-ROM disk in your Server-

WORKS software kit. Power on your server and boot

the CD-ROM disk.

If your server fails to boot from the CD-ROM, press Ctrl

+ Alt + Del, then Ctrl + A, when prompted, to run the

SCSISelect utility. Enable the Bootable CD-ROM and

INT13 lines, exit and reboot.

Server Installation

2. Select your language.

3. When prompted, you can create an MS-DOS partition

size appropriate for your operating system. You are

prompted to confirm your choice.

4. Select Installation and Utilities from the Quick Launch

main menu. Choose Express to automatically install

Microsoft Windows NT or Novell NetWare. Conven-

tional is for a traditional operating system installation

(creating diskettes for SCO UNIX, OS/2, Microsoft

Windows NT, or Novell NetWare).

Refer to the Quick Launch Reference Guide included

with the ServerWORKS software kit for detailed installa-

tion procedures.