Digital Equipment turboPrintServer 20 Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} Digital Equipment turboPrintServer 20. Digital Equipment turboPrintServer 20 6 pagina's. Controller firmware version 3.6 upgrade

Pagina afdrukken
Installing the Firmware
Installation
Procedure
2
To install the ROM chips:
Disconnect the power cord from the wall outlet and then from
1.
the rear panel.
Open the operator panel cover (
2.
Loosen the two captive screws from the card cage cover and
3.
remove the cover (
Loosen the two captive screws securing the grounding bracket
4.
and remove the bracket (
2
Pull open the release handles on each side of the controller
5.
board (
) and remove the board (
).
).
¡
).
¢
3
).
¡
2
1
1
2