Epson WorkForce WF-7510 Snelle installatie-instructies - Pagina 3
Blader online of download pdf Snelle installatie-instructies voor {categorie_naam} Epson WorkForce WF-7510. Epson WorkForce WF-7510 4 pagina's. Epson connect technology
Ook voor Epson WorkForce WF-7510: Handleiding voor bereik (7 pagina's), Start Here (2 pagina's)
Pagina afdrukken
6
Connect the fax line
To fax, connect the included phone cord to a telephone wall jack
and to the LINE port on the back of your product. To connect
a telephone or answering machine, use the EXT. port on your
product. See the Quick Guide for more details.
Note:
If you're connecting to a DSL phone line, you must use a DSL filter
or you won't be able to fax. Contact your DSL provider for the necessary
filter.
7
Install software
Note:
If your computer does not have a CD/DVD drive, you can
download the software from the Epson website. (See "Epson Technical
Support").
Caution:
Be sure to close your other programs, including screen savers
and virus protection programs, before beginning this software installation.
1
Make sure the printer is
NOT CONNECTED to
your computer.
W indows
:
If you see a Found New
®
Hardware screen, click Cancel and
disconnect the USB cable. You can't
install your software that way.
2
Insert your product CD.
3
Windows: If you see the AutoPlay window, click Run Setup.
exe. If you see the User Account Control screen, click Yes or
Continue.
M ac OS
X: Double-click the
®
4
Click Install (Windows) or Continue (Mac OS X) and follow
the instructions on your computer screen.
Epson icon.
5
When you see Select Your Connection screen, check
the "Connection options" section on this sheet for more
information. Then click Next (Windows) or Continue
(Mac OS X) and follow the instructions on your computer
screen.
Connection options
Wireless connection
You must install the software on every computer from which
you want to print. For the first installation, we recommend
using a temporary USB cable connection to simplify wireless
setup. After the printer is connected to the network, you will
be prompted to remove the cable.
If you're using Mac OS X 10.6 or 10.7 or you don't have a
USB cable, you will need to use the buttons on the printer
to select wireless settings. Follow the instructions on your
computer screen during software installation; they will explain
how to connect the printer wirelessly this way.
Make sure you know your network name (SSID) and network
password:
• Network name
• Network password
If you don't have this information, contact the person who set
up your network.
Direct USB connection
Make sure you have a USB cable (not included).
Wired network connection
Make sure you have an Ethernet
included). You must install the software on every computer
from which you want to print.
Any problems?
If you experience problems during setup, see below:
Network setup was unsuccessful.
• Make sure you select the right network name (SSID).
• If you see a firewall alert message, click Unblock or Allow
to let setup continue.
network cable (not
®