Digital Equipment PCXBV-Y Series Installatiehandleiding - Pagina 11
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Digital Equipment PCXBV-Y Series. Digital Equipment PCXBV-Y Series 20 pagina's.
Monitor Adjustments
In addition to brightness and contrast digital controls, this monitor has a
microprocessor-based On Screen Display (OSD) control system for
adjusting the following items:
•
horizontal width and position
•
vertical width and position
•
Pin and barrel distortion
•
trapezoid distortion
•
zoom
•
color levels
Once you make an adjustment to one or more of these, the monitor
automatically maintains it even when it is off.
The only time you may need to change the image settings is if you
change display modes (for example, you go from a 640 x 480 display
mode in DOS to a 800 x 600 display mode in Windows). In this case,
you may need to adjust the monitor controls to meet the display you
desire. The monitor stores the new display settings for the new mode.
When you switch between the two display modes, the monitor recalls
each of the settings you specified.
To adjust the OSD controls:
1. Press either image select button to highlight an item you wish to
adjust.
2. Press the + or – buttons to increase or decrease the adjustment.
3. To adjust another, repeat step 1 and 2.
NOTE: Most menus will disappear after 5 to 6 seconds. In order to
adjust an item, the item's OSD must be on screen.
7