Siemens SIMATIC ET 200AL Uitrustingshandleiding - Pagina 24

Blader online of download pdf Uitrustingshandleiding voor {categorie_naam} Siemens SIMATIC ET 200AL. Siemens SIMATIC ET 200AL 28 pagina's. 10-link digital output module dq 8x24vdc/2a 8xm12
Ook voor Siemens SIMATIC ET 200AL: Handmatig (38 pagina's), Handmatig (50 pagina's), Handmatig (38 pagina's), Handmatig (32 pagina's), Handmatig (37 pagina's), Uitrustingshandleiding (46 pagina's), Handmatig (26 pagina's), Uitrustingshandleiding (27 pagina's), Handmatig (25 pagina's)

Siemens SIMATIC ET 200AL Uitrustingshandleiding
Article number
Power loss
Power loss, typ.
Digital outputs
Number of digital outputs
in groups of
Short-circuit protection
Response threshold, typ.
Switching capacity of the outputs
on lamp load, max.
Load resistance range
lower limit
upper limit
Output voltage
for signal "1", min.
Output current
for signal "1" rated value
for signal "1" permissible range, max.
for signal "0" residual current, max.
Switching frequency
with resistive load, max.
with inductive load, max.
on lamp load, max.
Total current of the outputs
Current per group, max.
Cable length
unshielded, max.
Interrupts/diagnostics/status information
Substitute values connectable
Alarms
Diagnostic alarm
Diagnoses
Short-circuit
Diagnostics indication LED
Channel status display
for module diagnostics
For load voltage monitoring
Potential separation
between the load voltages
Digital output module DQ 8x24VDC/2A 8xM12 (6ES7142-5AF00-0BA0)
Equipment Manual, 08/2021, A5E36683723-AB
6ES7142-5AF00-0BA0
4 W
8
4; 2 load groups for 4 outputs each
Yes; per channel, electronic
2.8 A
10 W
12 Ω
4 kΩ
L+ (-0.8 V)
2 A
2 A; with inductive load to IEC 60947-5-1, DC-13 /
AC-15
0.5 mA
100 Hz
0.1 Hz; 0.25 Hz at 25 °C
1 Hz
4 A; For inductive load max. 2 channels per group
30 m
Yes; channel by channel, parameterizable
Yes; Parameterizable
Yes; Outputs to ground; module by module
Yes; green LED
Yes; green/red LED
Yes; green LED
Yes
Technical specifications
6.1 Technical specifications
23