Siemens simatic ET 200MP Handmatig - Pagina 18

Blader online of download pdf Handmatig voor {categorie_naam} Siemens simatic ET 200MP. Siemens simatic ET 200MP 40 pagina's. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Ook voor Siemens simatic ET 200MP: Handmatig (24 pagina's), Handmatig (29 pagina's), Handmatig (47 pagina's), Handmatig (26 pagina's), Handmatig (28 pagina's), Handmatig (50 pagina's), Handmatig (34 pagina's), Gebruikershandleiding (44 pagina's), Handmatig (30 pagina's), Handmatig (25 pagina's), Handmatig (42 pagina's), Handmatig (28 pagina's), Handmatig (33 pagina's), Handmatig (49 pagina's), Handmatig (36 pagina's), Handmatig (39 pagina's), Handmatig (28 pagina's), Uitrustingshandleiding (35 pagina's), Uitrustingshandleiding (32 pagina's), Handmatig (29 pagina's), Handmatig (34 pagina's), Handmatig (36 pagina's), Uitrustingshandleiding (50 pagina's), Handmatig (45 pagina's)

Parameters/address space

4.3 Declaration of parameters

Short-circuit detection

The diagnostics for short circuit to ground can be configured for the voltage output type. A

short-circuit detection is not possible for small output values; the output voltages must

therefore be below -0.1 V or above +0.1 V.

Open-circuit detection

The diagnostics for open circuit can be configured for the current output type. An open-circuit

detection is not possible for small output values; the output voltages must therefore be below

-0.2 mA or above +0.2 mA.

4.3

Declaration of parameters

Missing supply voltage L+

Enabling of the diagnostics, with missing or too little supply voltage L+.

Wire break

Enabling of the diagnostics if the line to the actuator is broken.

Short-circuit to ground

Enabling of the diagnostics if a short-circuit of the output to M

Overflow

Enabling of the diagnostics when the output value exceeds the overrange.

Underflow

Enabling of the diagnostics when the output value violates the underrange.

Reaction to CPU STOP

Determines the reaction of the output to the CPU going into STOP state.

Substitute value

The substitute value is the value that the module outputs in case of a CPU STOP.

occurs.

ANA

Analog output module AQ 4xU/I ST (6ES7532-5HD00-0AB0)

Manual, 09/2016, A5E03484696-AD