Siemens simatic ET 200MP Uitrustingshandleiding - Pagina 13

Blader online of download pdf Uitrustingshandleiding voor {categorie_naam} Siemens simatic ET 200MP. Siemens simatic ET 200MP 32 pagina's. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Ook voor Siemens simatic ET 200MP: Handmatig (40 pagina's), Handmatig (24 pagina's), Handmatig (29 pagina's), Handmatig (47 pagina's), Handmatig (26 pagina's), Handmatig (28 pagina's), Handmatig (50 pagina's), Handmatig (34 pagina's), Gebruikershandleiding (44 pagina's), Handmatig (30 pagina's), Handmatig (25 pagina's), Handmatig (42 pagina's), Handmatig (28 pagina's), Handmatig (33 pagina's), Handmatig (49 pagina's), Handmatig (36 pagina's), Handmatig (39 pagina's), Handmatig (28 pagina's), Uitrustingshandleiding (35 pagina's), Handmatig (29 pagina's), Handmatig (34 pagina's), Handmatig (36 pagina's), Uitrustingshandleiding (50 pagina's), Handmatig (45 pagina's)

Wiring

This section contains the block diagram of the module and outlines various wiring options.

You can find information on wiring the front connector, creating a cable shield, etc. in the

Wiring section of the system manual S7-1500/ET 200MP

(https://support.industry.siemens.com/cs/ww/en/view/59191792).

Note

Do not insert the potential jumpers included with the front connector!

Wiring and block diagram

The example in the following figure shows the terminal assignment and the assignment of

the channels.

① Backplane bus interface

Figure 3-1

Block diagram and terminal assignment

Digital output module DQ 8x230VAC/2A ST Triac (6ES7522-5FF00-0AB0)

CHx

Channel or channel status LED (green/red)

RUN

Status display LED (green)

ERROR

Error display LED (red)

Equipment Manual, 12/2021, A5E03485733-AE