Siemens simatic ET 200MP Handmatig - Pagina 13

Blader online of download pdf Handmatig voor {categorie_naam} Siemens simatic ET 200MP. Siemens simatic ET 200MP 36 pagina's. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Ook voor Siemens simatic ET 200MP: Handmatig (40 pagina's), Handmatig (24 pagina's), Handmatig (29 pagina's), Handmatig (47 pagina's), Handmatig (26 pagina's), Handmatig (28 pagina's), Handmatig (50 pagina's), Handmatig (34 pagina's), Gebruikershandleiding (44 pagina's), Handmatig (30 pagina's), Handmatig (25 pagina's), Handmatig (42 pagina's), Handmatig (28 pagina's), Handmatig (33 pagina's), Handmatig (49 pagina's), Handmatig (36 pagina's), Handmatig (39 pagina's), Handmatig (28 pagina's), Uitrustingshandleiding (35 pagina's), Uitrustingshandleiding (32 pagina's), Handmatig (29 pagina's), Handmatig (34 pagina's), Uitrustingshandleiding (50 pagina's), Handmatig (45 pagina's)

Address space

4.1

Address space

The module can be configured in various ways in STEP 7. Depending on the configuration,

additional/different addresses are assigned in the process image of the inputs.

Configuration options of DI 32x24VDC BA

You can configure the module with STEP 7 (TIA Portal) or with a GSD file.

When you configure the module by means of the GSD file, the configurations are available

under different abbreviations/module names.

The following configurations are possible:

Table 4- 1

Configuration options

Configuration

1 x 32-channel without value status

4 x 8-channel without value status

1 x 32-channel with value status for module-

internal Shared Input with up to 4 submodules

Digital input module DI 32x24VDC BA (6ES7521-1BL10-0AA0)

Manual, 09/2014, A5E32363711-AB

Short designation/

module name in the GSD

file

DI 32x24VDC BA

DI 32x24VDC BA S

DI 32x24VDC BA MSI

Configuration software, e.g., with STEP 7

(TIA Portal)

Integrated in hard-

GSD file in STEP 7

ware catalog

(TIA Portal) V12 or

STEP 7 (TIA Portal)

higher or STEP 7

V5.5 SP3 or higher

V13 or higher

V13 Update 3 or

higher

(PROFINET IO

only)

V13 Update 3 or

higher

(PROFINET IO

only)