Siemens SIMATIC ET 200S Handmatig - Pagina 10

Blader online of download pdf Handmatig voor {categorie_naam} Siemens SIMATIC ET 200S. Siemens SIMATIC ET 200S 16 pagina's. Distributed i/o digital electronic module 4do dc24v/2a hf
Ook voor Siemens SIMATIC ET 200S: Gebruikershandleiding (18 pagina's), Gebruikershandleiding (16 pagina's), Gebruikershandleiding (26 pagina's), Handmatig (37 pagina's), Handmatig (24 pagina's), Functiehandboek (40 pagina's), Gebruiksaanwijzing (4 pagina's), Originele gebruiksaanwijzing (19 pagina's), Originele gebruiksaanwijzing (20 pagina's), Handmatig (34 pagina's), Handmatig (14 pagina's), Handmatig (24 pagina's), Originele gebruiksaanwijzing (17 pagina's), Originele gebruiksaanwijzing (19 pagina's), Handmatig (16 pagina's), Handmatig (28 pagina's), Handmatig (12 pagina's), Handmatig (32 pagina's), Handmatig (18 pagina's), Handmatig (12 pagina's), Handmatig (28 pagina's), Handmatig (22 pagina's), Handmatig (22 pagina's), Handmatig (36 pagina's), Handmatig (16 pagina's)

Pagina afdrukken
Siemens SIMATIC ET 200S Handmatig
Properties
1.1 Digital electronic module 2DO DC24V/2A HF (6ES7132-4BB31-0AB0)
Rated load voltage L+ (from the power module)
•
Total current of the outputs (per module)
Electrical isolation
•
•
Permissible potential difference
•
Insulation tested
Current consumption
•
Power dissipation of the module
Status display
Diagnostics function
•
•
Output voltage
•
Output current
•
•
Output delay (for resistive load)
•
•
Load resistor range
Lamp load
Connecting two outputs in parallel
•
•
Control of a digital input
Switch rate
•
•
•
Limitation (internal) of the voltage induced on
circuit interruption
Reverse-voltage proof
Short-circuit protection of the output
•
Polarity reversal can lead to the digital outputs being connected through.
1
Per channel
2
10
Polarity reversal
Between the channels
Between the channels and backplane bus
Between the different circuits
From the rated load voltage L+ (no load)
Group error
Diagnostics functions readable
At signal "1"
At signal "1"
–
Rated value
–
Permitted range
With signal "0" (leakage current)
At "0" to "1"
At "1" to "0"
For redundant triggering of a load
To increase performance
For resistive load
On inductive load
For lamp load
Threshold on
Voltages, currents, potentials
24 VDC
Yes
1
4 A
No
Yes
75 VDC / 60 VAC
500 VDC
Max. 5 mA per channel
Typically 1.4 W
Status, interrupts, diagnostics
Green LED per channel
Red "SF" LED
Yes
Data for selecting an actuator
Min. L+ (-1 V)
2 A
7 mA to 2.4 A
Max. 0.5 mA
Max. 100 µs
Max. 400 µs
12 Ω to 3.4 kΩ
Max. 5 W
Yes (per module)
No
Yes
100 Hz
2 Hz (0.5 H)
10 Hz
Typically L+ (-55 V to -60 V)
Yes, if using the same load voltage as at the
power module
Yes
2
Typically 4 A
Digital electronic module 2DO DC24V/2A HF (6ES7132-4BB31-0AB0)
Manual, 04/2007, A5E01077255-01