Siemens SIMATIC ET 200S Handmatig - Pagina 7

Blader online of download pdf Handmatig voor {categorie_naam} Siemens SIMATIC ET 200S. Siemens SIMATIC ET 200S 18 pagina's. Distributed i/o digital electronic module 4do dc24v/2a hf
Ook voor Siemens SIMATIC ET 200S: Gebruikershandleiding (18 pagina's), Handmatig (16 pagina's), Gebruikershandleiding (16 pagina's), Gebruikershandleiding (26 pagina's), Handmatig (37 pagina's), Handmatig (24 pagina's), Functiehandboek (40 pagina's), Gebruiksaanwijzing (4 pagina's), Originele gebruiksaanwijzing (19 pagina's), Originele gebruiksaanwijzing (20 pagina's), Handmatig (34 pagina's), Handmatig (14 pagina's), Handmatig (24 pagina's), Originele gebruiksaanwijzing (17 pagina's), Originele gebruiksaanwijzing (19 pagina's), Handmatig (16 pagina's), Handmatig (28 pagina's), Handmatig (12 pagina's), Handmatig (32 pagina's), Handmatig (12 pagina's), Handmatig (28 pagina's), Handmatig (22 pagina's), Handmatig (22 pagina's), Handmatig (36 pagina's), Handmatig (16 pagina's)

Properties

1.1

Power module PM-E DC24..48V (6ES7138-4CA50-0AB0)

Properties

● The power module PM-E DC24..48V monitors the supply voltage for all the electronic

● You can use all the electronic modules except the 2DI AC120V ST, 2DI AC230V ST, and

● Control interface (PIQ) and feedback interface (PII) in the process image for option

● The current status of the power module is stored in the status byte in the process input

● The PM-E DC24..48V power module is suitable for fail-safe modules.

Maximum configuration per voltage group

The number of modules that can be connected depends on the total current of all modules in

a voltage group. This total must not exceed the maximum current carrying capacity.

Power module PM-E DC24..48V (6ES7138-4CA50-0AB0)

Manual, 04/2007, A5E01119980-01

modules in the voltage group. The supply voltage is fed in by means of the TM-P terminal

module.

2DO AC24..230V/1A in the voltage group of the PM-E DC24..48V power module.

handling.

image (PII). This is updated irrespective of whether the "No Load Voltage" diagnosis has

been enabled.

CAUTION

Only connect the specified rated load voltage of 24 VDC to 48 VDC to the TM-P terminal

module of the power module.

The connected rated load voltage must correspond to the supply voltage of the

electronic modules in the voltage group.