Siemens SIMATIC ET 200SP Handmatig - Pagina 14

Blader online of download pdf Handmatig voor {categorie_naam} Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 23 pagina's. Distributed i/o system
Ook voor Siemens SIMATIC ET 200SP: Handmatig (40 pagina's), Gebruikershandleiding (21 pagina's), Handmatig (34 pagina's), Handmatig (48 pagina's), Handmatig (30 pagina's), Handmatig (34 pagina's), Productinformatie (38 pagina's), Handmatig (37 pagina's), Handmatig (36 pagina's), Handmatig (44 pagina's), Handmatig (31 pagina's), Handmatig (35 pagina's), Configuratiehandleiding (20 pagina's), Handmatig (34 pagina's), Handmatig (29 pagina's), Handmatig (33 pagina's), Handmatig (31 pagina's), Gebruikershandleiding (32 pagina's), Handmatig (31 pagina's), Handmatig (28 pagina's), Handmatig (41 pagina's), Handmatig (32 pagina's), Handmatig (49 pagina's), Handmatig (24 pagina's), Handmatig (34 pagina's), Handmatig (41 pagina's), Handmatig (30 pagina's), Handmatig (31 pagina's), Handmatig (27 pagina's), Handmatig (24 pagina's), Handmatig (24 pagina's), Handmatig (25 pagina's), Handmatig (49 pagina's), Handmatig (40 pagina's), Handmatig (38 pagina's), Handmatig (39 pagina's), Productinformatie (24 pagina's), Handmatig (32 pagina's), Productinformatie (10 pagina's), Uitrustingshandleiding (43 pagina's), Handmatig (33 pagina's), Uitrustingshandleiding (44 pagina's), Originele gebruiksaanwijzing (6 pagina's), Handmatig (35 pagina's), Handmatig (28 pagina's), Uitrustingshandleiding (32 pagina's), Handmatig (50 pagina's), Handmatig (30 pagina's), Handmatig (26 pagina's), Handmatig (28 pagina's), Handmatig (34 pagina's), Handmatig (44 pagina's), Handmatig (33 pagina's), Uitrustingshandleiding (42 pagina's), Originele handleiding (16 pagina's)

Pagina afdrukken
Siemens SIMATIC ET 200SP Handmatig
Parameter assignment/addressing

4.3 Address space

4.3
Address space
Configuration options of DQ 4×24..230VAC/2A ST
The following configurations are possible:
● Configuration 1: Without value status
● Configuration 2: With value status
Evaluating the value status
An additional byte is allocated in the input address space if you enable the value status for
the digital module. Bits 0 to 3 in this byte are assigned to a channel. They provide
information about the validity of the digital value.
Bit =1: No fault is present on the channel.
Bit =0: Channel is deactivated or there is an error on the module.
If an error on a channel occurs with this module, the value status for all channels is 0.
Address space of the digital output module DQ 4×24..230VAC/2A ST
The following figure shows the assignment of the address space for the
DQ 4×24..230VAC/2A ST with value status (Quality Information (QI)). The addresses for the
value status are only available if the value status is enabled.
Figure 4-1
14
Address space of the DQ 4×24..230VAC/2A ST digital output module with value status
DQ 4x24..230VAC/2A ST digital output module (6ES7132-6FD00-0BB1)
Manual, 03/2015, A5E32043575-AB