Siemens SIMATIC ET 200SP Handmatig - Pagina 18

Blader online of download pdf Handmatig voor {categorie_naam} Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 34 pagina's. Distributed i/o system
Ook voor Siemens SIMATIC ET 200SP: Handmatig (40 pagina's), Gebruikershandleiding (21 pagina's), Handmatig (34 pagina's), Handmatig (48 pagina's), Handmatig (30 pagina's), Handmatig (34 pagina's), Productinformatie (38 pagina's), Handmatig (37 pagina's), Handmatig (36 pagina's), Handmatig (44 pagina's), Handmatig (31 pagina's), Handmatig (35 pagina's), Handmatig (23 pagina's), Configuratiehandleiding (20 pagina's), Handmatig (29 pagina's), Handmatig (33 pagina's), Handmatig (31 pagina's), Gebruikershandleiding (32 pagina's), Handmatig (31 pagina's), Handmatig (28 pagina's), Handmatig (41 pagina's), Handmatig (32 pagina's), Handmatig (49 pagina's), Handmatig (24 pagina's), Handmatig (34 pagina's), Handmatig (41 pagina's), Handmatig (30 pagina's), Handmatig (31 pagina's), Handmatig (27 pagina's), Handmatig (24 pagina's), Handmatig (24 pagina's), Handmatig (25 pagina's), Handmatig (49 pagina's), Handmatig (40 pagina's), Handmatig (38 pagina's), Handmatig (39 pagina's), Productinformatie (24 pagina's), Handmatig (32 pagina's), Productinformatie (10 pagina's), Uitrustingshandleiding (43 pagina's), Handmatig (33 pagina's), Uitrustingshandleiding (44 pagina's), Originele gebruiksaanwijzing (6 pagina's), Handmatig (35 pagina's), Handmatig (28 pagina's), Uitrustingshandleiding (32 pagina's), Handmatig (50 pagina's), Handmatig (30 pagina's), Handmatig (26 pagina's), Handmatig (28 pagina's), Handmatig (34 pagina's), Handmatig (44 pagina's), Handmatig (33 pagina's), Uitrustingshandleiding (42 pagina's), Originele handleiding (16 pagina's)

Pagina afdrukken

Parameters/address space

4.3 Address space

2 x 2-channel configuration

For the configuration, the channels of the module are divided into multiple submodules. The

submodules can be assigned to different IO controllers when the module is used in a Shared

Device.

The number of usable submodules is dependent on the interface module used. Read the

information in the manual for the particular interface module.

Value status (quality information, QI)

The value status is always activated for the following module names:

● DQ 4×24VDC/2A HF QI

● DQ 4×24VDC/2A HF MSO

An additional bit is assigned to each channel for the value status. The bit for the value status

indicates if the output value specified by the user program is actually pending at the module

terminal (0 = value is incorrect).

Address space for configuration as 1 x 4-channel DQ 4×24VDC/2A HF V1.0

The figure below shows the address space assignment for configuration as a 4-channel

module without value status.

Image 4-1

Address space for configuration as 1 x 4-channel DQ 4×24VDC/2A HF, QI without value

status

Digital output module DQ 4x24VDC/2A HF (6ES7132-6BF20-0CA0)

Manual, 12/2015, A5E32855695-AC