Siemens SIMATIC ET 200SP Handmatig - Pagina 19

Blader online of download pdf Handmatig voor {categorie_naam} Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 32 pagina's. Distributed i/o system
Ook voor Siemens SIMATIC ET 200SP: Handmatig (40 pagina's), Gebruikershandleiding (21 pagina's), Handmatig (34 pagina's), Handmatig (48 pagina's), Handmatig (30 pagina's), Handmatig (34 pagina's), Productinformatie (38 pagina's), Handmatig (37 pagina's), Handmatig (36 pagina's), Handmatig (44 pagina's), Handmatig (31 pagina's), Handmatig (35 pagina's), Handmatig (23 pagina's), Configuratiehandleiding (20 pagina's), Handmatig (34 pagina's), Handmatig (29 pagina's), Handmatig (33 pagina's), Handmatig (31 pagina's), Gebruikershandleiding (32 pagina's), Handmatig (31 pagina's), Handmatig (28 pagina's), Handmatig (41 pagina's), Handmatig (49 pagina's), Handmatig (24 pagina's), Handmatig (34 pagina's), Handmatig (41 pagina's), Handmatig (30 pagina's), Handmatig (31 pagina's), Handmatig (27 pagina's), Handmatig (24 pagina's), Handmatig (24 pagina's), Handmatig (25 pagina's), Handmatig (49 pagina's), Handmatig (40 pagina's), Handmatig (38 pagina's), Handmatig (39 pagina's), Productinformatie (24 pagina's), Handmatig (32 pagina's), Productinformatie (10 pagina's), Uitrustingshandleiding (43 pagina's), Handmatig (33 pagina's), Uitrustingshandleiding (44 pagina's), Originele gebruiksaanwijzing (6 pagina's), Handmatig (35 pagina's), Handmatig (28 pagina's), Uitrustingshandleiding (32 pagina's), Handmatig (50 pagina's), Handmatig (30 pagina's), Handmatig (26 pagina's), Handmatig (28 pagina's), Handmatig (34 pagina's), Handmatig (44 pagina's), Handmatig (33 pagina's), Uitrustingshandleiding (42 pagina's), Originele handleiding (16 pagina's)

Pagina afdrukken

4.3

Address space

The module can be configured differently in STEP 7; see following table. Depending on the

configuration, additional/different addresses are assigned in the process image of the inputs.

Configuration options of RQ 4x120VDC-230VAC/5A NO ST

You can configure the module with STEP 7 (TIA Portal) or with a GSD file. If you configure

the module using a GSD file, the configurations are available under various short

designations/module names; see the table below. The following configurations are possible:

Table 4- 2

Configuration options with GSD file

Configuration

1 x 4-channel without

value status

1 x 4-channel with value

status

Evaluating the value status

An additional byte is allocated in the input address space if you enable the value status for

the digital module. Bits 0 to 3 in this byte are assigned to a channel. They provide

information about the validity of the digital value.

Bit = 1: No fault is present on the channel.

Bit = 0: Channel is disabled or there is a fault/error on the module.

If a fault/error occurs on a channel with this module, the value status for all channels is 0.

Address space

The following figure shows the assignment of the address space for the

RQ 4x120VDC-230VAC/5A NO ST with value status (Quality Information (QI)). The

addresses for the value status are only available if the value status is enabled.

Figure 4-1

Digital output module RQ 4x120VDC-230VAC/5A NO ST (6ES7132-6HD01-0BB1)

Manual, 09/2017, A5E03576775-AE

Short designation/module name in

the GSD file

RQ 4x120VDC-230VAC/5A NO

ST V0.0

RQ 4x120VDC-230VAC/5A NO

ST V0.0, QI

Address space of RQ 4×120VDC-230VAC/5A NO ST with value status

Configuration software, e.g. with STEP 7 (TIA Portal)

Integrated in hard-

ware catalog STEP 7

PROFINET IO

V14, SP1 or higher

with HSP 0222

V14, SP1 or higher

with HSP 0222

Parameters/address space

4.3 Address space

GSD file

PROFIBUS DP

---