Epson XP-4105 Beknopte handleiding - Pagina 3

Blader online of download pdf Beknopte handleiding voor {categorie_naam} Epson XP-4105. Epson XP-4105 17 pagina's.
Ook voor Epson XP-4105: Snelstarthandleiding (4 pagina's)

Pagina afdrukken

■

When using TCP/IP, make sure your network's DHCP option is enabled (your router

manufacturer will be able to assist you with this setting).

■

Print a network status sheet from the product's control panel. Load a few sheets of

plain paper in your product. Press

Settings

Network Status

■

Remove and reinstall your product software.

Printing a Connection Check Report

You can print a network connection report and check for any error codes and messages to

solve problems you may encounter with network connections.

Load a few sheets of plain paper in your product.

Press

if necessary, and select

Print Check Report

The connection report prints. Check for any error codes and follow the solutions on

the report.

Below are a few common error codes and solutions. If you do not see your error code listed

here, see the online User's Guide.

Error code E1: Make sure your router, access point, and/or hub are turned on, and the

network cable is securely connected to your device and to your product.

Error code E2, E3, or E7:

■

Make sure your router or access point is turned on, and is correctly connected to your

computer or network device.

■

Turn off the router or access point, wait about 10 seconds, and turn it on again.

■

Move your product closer to your router or access point, and remove any obstacles

between them.

if necessary, and select

Print Status Sheet

Settings

Message or solution

. Then press the

Network Settings

Error code

Printing a Connection Check Report

Settings

Network

start button.

Connection Check