Siemens SIMATIC ET 200SP Handmatig - Pagina 25

Blader online of download pdf Handmatig voor {categorie_naam} Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 40 pagina's. Distributed i/o system
Ook voor Siemens SIMATIC ET 200SP: Handmatig (40 pagina's), Gebruikershandleiding (21 pagina's), Handmatig (34 pagina's), Handmatig (48 pagina's), Handmatig (30 pagina's), Handmatig (34 pagina's), Productinformatie (38 pagina's), Handmatig (37 pagina's), Handmatig (36 pagina's), Handmatig (44 pagina's), Handmatig (31 pagina's), Handmatig (35 pagina's), Handmatig (23 pagina's), Configuratiehandleiding (20 pagina's), Handmatig (34 pagina's), Handmatig (29 pagina's), Handmatig (33 pagina's), Handmatig (31 pagina's), Gebruikershandleiding (32 pagina's), Handmatig (31 pagina's), Handmatig (28 pagina's), Handmatig (41 pagina's), Handmatig (32 pagina's), Handmatig (49 pagina's), Handmatig (24 pagina's), Handmatig (34 pagina's), Handmatig (41 pagina's), Handmatig (30 pagina's), Handmatig (31 pagina's), Handmatig (27 pagina's), Handmatig (24 pagina's), Handmatig (24 pagina's), Handmatig (25 pagina's), Handmatig (49 pagina's), Handmatig (38 pagina's), Handmatig (39 pagina's), Productinformatie (24 pagina's), Handmatig (32 pagina's), Productinformatie (10 pagina's), Uitrustingshandleiding (43 pagina's), Handmatig (33 pagina's), Uitrustingshandleiding (44 pagina's), Originele gebruiksaanwijzing (6 pagina's), Handmatig (35 pagina's), Handmatig (28 pagina's), Uitrustingshandleiding (32 pagina's), Handmatig (50 pagina's), Handmatig (30 pagina's), Handmatig (26 pagina's), Handmatig (28 pagina's), Handmatig (34 pagina's), Handmatig (44 pagina's), Handmatig (33 pagina's), Uitrustingshandleiding (42 pagina's), Originele handleiding (16 pagina's)

Pagina afdrukken

1. Wiring and Block Diagram

4.3

Address space

Configuration options of the communication module IO-Link Master CM 4xIO-Link

The size of the input and output addresses of the IO-Link Master CM 4xIO-Link

communication module with firmware version V1.0 is 32 bytes in each case. As of firmware

version V2.0, the modules support a variable address space for I/O data.

As of firmware version V2.2, you can configure the port directly in STEP 7.

The following table provides an overview of the configuration options of the supported

address areas for I/O data:

Module configuration/

supported address space for

I/O data

1 byte input/1 byte output

2-byte inputs/2-byte outputs

4-byte inputs/4-byte outputs

8-byte inputs/0-byte outputs

8-byte inputs/8-byte outputs

12-byte inputs/8-byte outputs

12-byte inputs/12-byte outputs

16-byte inputs/16-byte outputs

20-byte inputs/16-byte outputs

32-byte inputs/32-byte outputs

36-byte inputs/32-byte outputs

64-byte inputs/64-byte outputs

68-byte inputs/64-byte outputs

144-byte inputs**/128-byte

outputs

* No PortQualifierInformation is transferred with this configuration.

** The 144-byte input address range covers additional quality information (PortQualifier) in addition to

the 128-byte process data.

Note

Use of the IO-Link Master CM 4xIO-Link with I/O data > 32 bytes

IM 155-6 PN HF/ST interface modules with firmware versions up to V3.0 only support I/O

data up to 32 bytes. If you are using IO-Link Master CM 4xIO-Link with I/O data > 32 bytes,

you need the IM 155-6 PN HF/ST interface module with firmware version as of V3.1.

Communication module IO-Link Master CM 4xIO-Link (6ES7137-6BD00-0BA0)

Manual, 10/2017, A5E03856846-AD

IO-Link master

with firmware

V1.0

V2.0

Parameters/address space

4.3 Address space

IO-Link master

with firmware

V2.1

V2.2