Siemens SIMATIC ET 200SP Handmatig - Pagina 23

Blader online of download pdf Handmatig voor {categorie_naam} Siemens SIMATIC ET 200SP. Siemens SIMATIC ET 200SP 28 pagina's. Distributed i/o system
Ook voor Siemens SIMATIC ET 200SP: Handmatig (40 pagina's), Gebruikershandleiding (21 pagina's), Handmatig (34 pagina's), Handmatig (48 pagina's), Handmatig (30 pagina's), Handmatig (34 pagina's), Productinformatie (38 pagina's), Handmatig (37 pagina's), Handmatig (36 pagina's), Handmatig (44 pagina's), Handmatig (31 pagina's), Handmatig (35 pagina's), Handmatig (23 pagina's), Configuratiehandleiding (20 pagina's), Handmatig (34 pagina's), Handmatig (29 pagina's), Handmatig (33 pagina's), Handmatig (31 pagina's), Gebruikershandleiding (32 pagina's), Handmatig (31 pagina's), Handmatig (28 pagina's), Handmatig (41 pagina's), Handmatig (32 pagina's), Handmatig (49 pagina's), Handmatig (24 pagina's), Handmatig (34 pagina's), Handmatig (41 pagina's), Handmatig (30 pagina's), Handmatig (31 pagina's), Handmatig (27 pagina's), Handmatig (24 pagina's), Handmatig (24 pagina's), Handmatig (25 pagina's), Handmatig (49 pagina's), Handmatig (40 pagina's), Handmatig (38 pagina's), Handmatig (39 pagina's), Productinformatie (24 pagina's), Handmatig (32 pagina's), Productinformatie (10 pagina's), Uitrustingshandleiding (43 pagina's), Handmatig (33 pagina's), Uitrustingshandleiding (44 pagina's), Originele gebruiksaanwijzing (6 pagina's), Handmatig (35 pagina's), Handmatig (28 pagina's), Uitrustingshandleiding (32 pagina's), Handmatig (50 pagina's), Handmatig (30 pagina's), Handmatig (26 pagina's), Handmatig (34 pagina's), Handmatig (44 pagina's), Handmatig (33 pagina's), Uitrustingshandleiding (42 pagina's), Originele handleiding (16 pagina's)

Siemens SIMATIC ET 200SP Handmatig
Byte 1: "Status type" variant
Table 5- 7
Bit no.
7
6...0
Byte 2: Slot number
Slot number (1...n) of the slave module
0 is the placeholder for the overall device.
Byte 3: "Interrupt specifier" variant
Table 5- 8
Bit no.
7...3
2
1...0
Communication module CM DP (6ES7545-5DA00-0AB0)
Manual, 12/2014, A5E33619758-AB
Structure of byte 1 of the device-specific diagnostics ("Status type" variant)
Value
Meaning
1
Status message
Status_Type
0
- Reserved -
1
Status message
2
Module_Status (see also bytes 4...62)
3...31
- Reserved -
32...126
Vendor-specific
127
- Reserved -
Structure of byte 3 of the device-specific diagnostics ("Interrupt specifier" variant)
Seq_No
Unique identification of an alarm message
Add_Ack
If this bit is set, the DP V1 master indicates that this interrupt
expects an acknowledgment in the form of a WRITE job.
Alarm_Specifier
0
No further distinction
1
Interrupt appears, slot is disrupted
The slot generates an interrupt due to an error.
2
Interrupt disappears, slot is OK
The slot generates an interrupt and indicates that there is no other
error.
3
Interrupt disappears, slot is still disrupted
The slot generates an interrupt and indicates that errors remain.
Diagnostics, error and system alarms
5.4 Device-specific diagnostics with DP-V1
Meaning
Meaning
23