Siemens SIMATIC ET 200SP HA Handmatig - Pagina 38

Blader online of download pdf Handmatig voor {categorie_naam} Siemens SIMATIC ET 200SP HA. Siemens SIMATIC ET 200SP HA 50 pagina's. Distributed i/o devices busadapter for distributed i/o
Ook voor Siemens SIMATIC ET 200SP HA: Handmatig (32 pagina's), Handmatig (34 pagina's), Handmatig (38 pagina's), Uitrustingshandleiding (44 pagina's), Uitrustingshandleiding (50 pagina's), Uitrustingshandleiding (38 pagina's), Uitrustingshandleiding (46 pagina's), Uitrustingshandleiding (42 pagina's), Uitrustingshandleiding (44 pagina's), Uitrustingshandleiding (36 pagina's), Uitrustingshandleiding (38 pagina's)

Drivers, parameters, diagnostics messages and address space

A.2 Parameter assignment

Error_

Cause

Code_

0xE1

0x01

Reserved bit set

0xE1

0x02

Invalid diagnostics enable bit set for operating mode

0xE1

0x05

Invalid encoding for encoder type

0xE1

0x0B

Invalid coding for pulse stretching

0xE1

0x0E

Invalid redundancy parameter assignment

0xE1

0x21

Channel must be disabled due to change-over con‐

tact mode

0xE1

0x22

No inversion is allowed for change-over contact

0xE1

0x23

invalid coding of flutter monitoring

Valid parameters

Only the values specified in the following are permitted. Values that are not listed are rejected

by the module.

Every parameter data record is checked by the module. If an incorrect parameter is detected,

the entire data record is rejected and the parameters of the module remain unchanged.