Siemens SIMATIC ET 200SP HA Uitrustingshandleiding - Pagina 27

Blader online of download pdf Uitrustingshandleiding voor {categorie_naam} Siemens SIMATIC ET 200SP HA. Siemens SIMATIC ET 200SP HA 44 pagina's. Distributed i/o devices busadapter for distributed i/o
Ook voor Siemens SIMATIC ET 200SP HA: Handmatig (32 pagina's), Handmatig (50 pagina's), Handmatig (34 pagina's), Handmatig (38 pagina's), Uitrustingshandleiding (50 pagina's), Uitrustingshandleiding (38 pagina's), Uitrustingshandleiding (46 pagina's), Uitrustingshandleiding (42 pagina's), Uitrustingshandleiding (44 pagina's), Uitrustingshandleiding (36 pagina's), Uitrustingshandleiding (38 pagina's)

Maintenance

5.1

The device name of the distributed I/O device is saved at the following locations when

transferring the device name to the distributed I/O:

● In the BusAdapter

● In the interface of the distributed I/O device (e.g. interface module or I/O device itself)

Note

Replacing a BusAdapter (removing/inserting)

Removing/inserting the BusAdapter under voltage is prohibited.

Device replacement without transfer of topological configuration

The following scenarios are the result of saving the device name on the BusAdapter and in the

interface when exchanging the two components:

BusAdapter non-program‐

med

(without device name)

BusAdapter with device

name

Note

Restoring the factory settings

Resetting to factory settings deletes the device name in the interface and in the BusAdapter.

BusAdapter for Distributed I/O

Equipment Manual, 09/2019, A5E39261458-AB

Interface non-program‐

med

(without device name)

No device names

When the supply voltage is switched on, the device name is copied from

the BusAdapter to the interface.

Interface with device name

When the supply voltage is switched on, the

device name is copied from the interface to

the BusAdapter.