Siemens Simatic ET200pro Handmatig - Pagina 14
Blader online of download pdf Handmatig voor {categorie_naam} Siemens Simatic ET200pro. Siemens Simatic ET200pro 26 pagina's. Migration
Ook voor Siemens Simatic ET200pro: Handmatig (29 pagina's), Gebruiksaanwijzing (8 pagina's), Productinformatie (2 pagina's)
Pagina afdrukken
Migration SIMATIC ET 200pro FC 108869725
2.6
Overview Hardware.
The mechanical assembly of the new ET 200pro FC-2 remains identical to that of
the old ET 200pro FC unit. The same mounting rail arrangement and connection of
other ET200 modules for the various functions remains unchanged.
2.6.1
Spare Parts and Accessories.
The spare parts and accessories below remain unchanged compared to the old ET
200pro FC apart from the memory card MLFB which is different.
Optical cable
The optical cable is used to connect a configuring or operating device with an
RS232 interface to the optical interface of the converter. Electronics integrated in
the cable converts electrical signals of up to 115 kBd into optical signals and vice
versa.
Table 3
3RK19 22-2BP00
Motor cable
Prefabricated motor cables up to 10 m long are available ex stock for connecting
the motor. Longer lengths up to 15 m can be obtained from our SINAMICS service
providers.
Table 4
6ES7194-1LA01-0AA0
6ES7194-1LB01-0AA0
6ES7194-1LC01-0AA0
6ES7194-1LD01-0AA0
Power jumper connector
Using the power jumper connector it is possible for one converter to loop through
up to 25 A from 3AC 400 V to another frequency converter mounted directly
alongside. The common fusing of the primary supply is provided externally.
Version 1.02; FAQ-046BZQ5W
Order No.
Order No.
30.11.2015
SIMATIC ET 200pro Power Modules
Length
1.5m
3.0m
5.0m
10.0m
14/26