Siemens SIMATIC NET Montagehandleiding - Pagina 2

Blader online of download pdf Montagehandleiding voor {categorie_naam} Siemens SIMATIC NET. Siemens SIMATIC NET 6 pagina's. Network components bus terminal
Ook voor Siemens SIMATIC NET: Gebruiksaanwijzing (29 pagina's), Gebruiksaanwijzing (50 pagina's), Gebruiksaanwijzing (28 pagina's), Productinformatie (6 pagina's), Installatiehandleiding (40 pagina's), Installatiehandleiding (50 pagina's), Installatiehandleiding (40 pagina's), Referentiehandleiding (14 pagina's), Installatiehandleiding (34 pagina's), Installatiehandleiding (48 pagina's), Gebruiksaanwijzing (32 pagina's)

Montageanleitung für / Assembly Instructions for SIMATIC NET IE FC RJ45 Plug 180

Notes:

Replace the knife cassette if the cut edges

become ragged or after approx.·

· 1500 operations on cables with PVC outer

jackets·

· 150 operations on cables with PUR

outer jackets

When using devices without a securing collar, make sure to provide strain relief for the cable as closely as possible to the device.

You will find information on network structures in the "SIMATIC NET Industrial Ethernet Networking Manual" or in the order

overview.

https://support.industry.siemens.com/cs/ww/en/view/27069465

http://w3app.siemens.com/mcms/infocenter/dokumentencenter/sc/ic/Documentsu20Brochures/6ZB5530-1BK02-

0BA3_IE_Verkabelungstechnik_EN_04_2016_Web.pdf

The piercing contacts of the FC RJ45 plug

can be released and recontacted up to 10

times. Cable ends that have already been

pierced must not be used again but must be

cut off.

Don't pull while unlocking the plug.

6GK1901-1BB10-2Axx

To create a crossover cable, combine the

wires in the connector at one end according

to the following scheme:

Connect white with yellow

Connect blue with orange