Siemens SIMATIC NET Installatiehandleiding - Pagina 34

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Siemens SIMATIC NET. Siemens SIMATIC NET 50 pagina's. Network components bus terminal
Ook voor Siemens SIMATIC NET: Gebruiksaanwijzing (29 pagina's), Gebruiksaanwijzing (50 pagina's), Gebruiksaanwijzing (28 pagina's), Montagehandleiding (6 pagina's), Productinformatie (6 pagina's), Installatiehandleiding (40 pagina's), Installatiehandleiding (40 pagina's), Referentiehandleiding (14 pagina's), Installatiehandleiding (34 pagina's), Installatiehandleiding (48 pagina's), Gebruiksaanwijzing (32 pagina's)

Pagina afdrukken
Siemens SIMATIC NET Installatiehandleiding
Specifications
For specifications on the available copper Ethernet ports, refer to
Port Specifications (Page
4.2

Fiber Optic Ethernet Ports

Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer
Registered Jack), LC (Lucent Connector), SC (Standard or Subscriber Connector) or ST
(Straight Tip) connectors. Make sure the Transmit (Tx) and Receive (Rx) connections
of each port are properly connected and matched to establish a proper link.
Port Types
1
1
2
Figure 4.4
1
1
2
Figure 4.6
LEDs
Each port features an LED that indicates the link/activity state of the port.
Yellow (Solid)
Yellow (Blinking)
RUGGEDCOM RS900F
Installation Manual, 04/2021, C79000-G8976-1350-07
Pin
6
7
8
28)".
2
Tx Connector
Rx Connector
MTRJ Port
Tx Connector
Rx Connector
SC Port
State
Name
TX-
Reserved (Do Not Connect)
Reserved (Do Not Connect)
 
1
Tx Connector
1
Rx Connector
2
Figure 4.5
 
2
1
Tx Connector
1
Rx Connector
2
Figure 4.7
Link established
Link activity
Communication Ports
4.2 Fiber Optic Ethernet Ports
Description
Transmit Data-
"Copper Ethernet
2
LC Port
2
ST Port
Description
25