Siemens SIMATIC NET Gebruiksaanwijzing - Pagina 15

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Siemens SIMATIC NET. Siemens SIMATIC NET 32 pagina's. Network components bus terminal
Ook voor Siemens SIMATIC NET: Gebruiksaanwijzing (29 pagina's), Gebruiksaanwijzing (50 pagina's), Gebruiksaanwijzing (28 pagina's), Montagehandleiding (6 pagina's), Productinformatie (6 pagina's), Installatiehandleiding (40 pagina's), Installatiehandleiding (50 pagina's), Installatiehandleiding (40 pagina's), Referentiehandleiding (14 pagina's), Installatiehandleiding (34 pagina's), Installatiehandleiding (48 pagina's)

2.2

Mounting and attaching the bus cable(s)

Installation

Types of installation

The 12M bus terminal can be mounted in three different ways:

• By snapping it on to a 35 mm DIN rail according to DIN EN50022-35x7.5

• By screwing it to a mounting plate (refer to the section "Drilling template") using two cheese

head screws.

• Wall mounting (brick, concrete). You require 2 type 5 plugs, 2 half-round wood screws

DIN 96, size 3.5 , L70 and two washers DIN 125‑4.3.

Note

Please make sure that the 12M bus terminal is accessible for maintenance and installation work

even during operation.

Drilling template

The following figure shows the drilling template for screw fastening.

①

②

Figure 2-1

Connecting up

Follow the steps below to connect the bus cable:

1. Open the bus cable at the point at which the bus terminal will be inserted.

2. Strip approximately 33 mm of the outer jacket. Make sure that the braided shield is not

damaged when you strip the jacket.

12M bus terminal

Operating Instructions, 06/2022, C79000-G8976-C333-02

Top edge of the 12M bus terminal

M4 thread or 4.2 mm hole

Drilling template for the 12M bus terminal

2.2 Mounting and attaching the bus cable(s)

Installation