Siemens SIMATIC PCS 7 Systeemhandleiding - Pagina 9
Blader online of download pdf Systeemhandleiding voor {categorie_naam} Siemens SIMATIC PCS 7. Siemens SIMATIC PCS 7 28 pagina's. Process control system, basis library readme v9.0 sp1 online
Ook voor Siemens SIMATIC PCS 7: Inleiding Handboek (6 pagina's), Functiehandboek (42 pagina's), Gebruiksaanwijzing (36 pagina's), Lees mij (26 pagina's), Handmatig (39 pagina's)
Pagina afdrukken
Channel block for motor management starter
Pcs7Cntx (x=1..3)
Channel blocks for recording count values of counter modules.
StRep
Block for configuring a block group for alarm hiding.
AutoExcitation
The block is used to generate suitable trigger signals for the identification of dynamic, multi-
variable process models for a model-based predictive controller, ModPreCon.
LPOptim
Block for optimizing a linear performance function. The block is used by the ModPreCon block
for static operating point optimization.
Block extensions in the Advanced Process Library for PCS 7 V8.0
Polygon
The polygon block can be cascaded.
Event and Event_TS
The messages generated by the Event and Event_TS blocks were added to supplement the
SIMATIC BATCH information.
PidConL
Extensions to the continuous PID controller, PIDConL:
● Connection of an external control deviation
● Monitoring for the control deviation can be suppressed for a configurable period of time
PidConR
Extensions to the continuous PID controller, PidConR
● Connection of an external control deviation
● The proportional action can be connected to the feedback.
● The derivative action can be configured for the control deviation and connected to the
● Generation of time-stamped messages by the EventTS block.
MotSpdCL
The MotSpdCL block determines the machine and motor speed using a gear reduction factor.
RateLim
Extension of the RateLim ramp block by the "Ramp-shaped approach to a target value"
function.
What's new in SIMATIC PCS 7 (V8.0)?
System Manual, 12/2011, A5E02779862-01
following a setpoint step.
feedback.
Engineering Station - What's new in PCS 7 V8.0?
2.4 APL - What's new in the Advanced Process Library V8.0?
9