Siemens Simatic S7-1500 Handmatig - Pagina 19

Blader online of download pdf Handmatig voor {categorie_naam} Siemens Simatic S7-1500. Siemens Simatic S7-1500 37 pagina's. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Ook voor Siemens Simatic S7-1500: Handmatig (40 pagina's), Handmatig (47 pagina's), Handmatig (24 pagina's), Handmatig (34 pagina's), Gebruikershandleiding (45 pagina's), Handmatig (27 pagina's), Configuratiehandleiding (20 pagina's), Handmatig (47 pagina's), Handmatig (43 pagina's), Handmatig (48 pagina's), Handmatig (26 pagina's), Handmatig (28 pagina's), Handmatig (50 pagina's), Handmatig (34 pagina's), Gebruikershandleiding (44 pagina's), Handmatig (50 pagina's), Handmatig (30 pagina's), Handmatig (41 pagina's), Handmatig (50 pagina's), Handmatig (40 pagina's), Veiligheidsprogrammering Manualline (48 pagina's), Communicatiehandleiding (36 pagina's), Handmatig (40 pagina's), Handmatig (25 pagina's), Handmatig (42 pagina's), Toepassing Beschrijving (50 pagina's), Handmatig (28 pagina's), Handmatig (33 pagina's), Handmatig (49 pagina's), Handmatig (36 pagina's), Handmatig (41 pagina's), Handmatig (46 pagina's), Handmatig (38 pagina's), Handmatig (35 pagina's), Handmatig (39 pagina's), Handmatig (28 pagina's), Handmatig (35 pagina's), Uitrustingshandleiding (35 pagina's), Handmatig (50 pagina's), Uitrustingshandleiding (32 pagina's), Uitrustingshandleiding (38 pagina's), Handmatig (29 pagina's), Uitrustingshandleiding (38 pagina's), Handmatig (34 pagina's), Handmatig (36 pagina's), Uitrustingshandleiding (50 pagina's), Handmatig (45 pagina's)

Pagina afdrukken

1. Wiring

4.3

Address space

The module can be configured differently in STEP 7; see following table. Depending on the

configuration, additional/different addresses are assigned in the process image of the

outputs/inputs.

Configuration options of DQ 32x24VDC/0.5A HF

You can configure the module with STEP 7 (TIA Portal) or with a GSD file.

When you configure the module by means of the GSD file, the configurations are available

under different abbreviations/module names.

The following configurations are possible:

Table 4- 2

Configuration options

Configuration

1 x 32-channel without value status DQ 32x24VDC/0.5A HF

1 x 32-channel with value status

4 x 8-channel without value status

4 x 8-channel with value status

1 x 32-channel with value status for

module-internal Shared Output with

up to 4 submodules

Note

Substitute value behavior in shared device mode with the following configuration:

• 1 x 32 channel with value status for MSO

• 1 x 32 channel with / without value status

• 4 x 8-channel with / without value status

If the system is in shared device mode and one of the IO controllers involved goes into

STOP or fails due to a communication failure, for example, all submodules of the output

module perform the configured substitute value reaction (e.g. shutdown).

This means that even when only one IO controller fails, the other IO controllers associated

with the shared device no longer control the assigned submodule of the output module.

Digital output module DQ 32x24VDC/0.5A HF (6ES7522-1BL01-0AB0)

Manual, 09/2016, A5E35683508-AB

Abbreviation/module name in

the

GSD file

DQ 32x24VDC/0.5A HF QI

DQ 32x24VDC/0.5A HF S

DQ 32x24VDC/0.5A HF S QI

DQ 32x24VDC/0.5A HF MSO

Parameters/address space

Configuration software, e.g., STEP 7 (TIA Portal)

Integrated in the hard-

ware catalog STEP 7

STEP 7 (TIA Portal) V12 or

(TIA Portal) as of V13

higher or STEP 7 V5.5 SP3

SP1 with HSP 0143

(PROFINET IO only)

4.3 Address space

GSD file in

or higher

(PROFINET IO only)