Siemens Simatic S7-1500 Configuratiehandleiding - Pagina 11

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Siemens Simatic S7-1500. Siemens Simatic S7-1500 20 pagina's. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Ook voor Siemens Simatic S7-1500: Handmatig (40 pagina's), Handmatig (37 pagina's), Handmatig (47 pagina's), Handmatig (24 pagina's), Handmatig (34 pagina's), Gebruikershandleiding (45 pagina's), Handmatig (27 pagina's), Handmatig (47 pagina's), Handmatig (43 pagina's), Handmatig (48 pagina's), Handmatig (26 pagina's), Handmatig (28 pagina's), Handmatig (50 pagina's), Handmatig (34 pagina's), Gebruikershandleiding (44 pagina's), Handmatig (50 pagina's), Handmatig (30 pagina's), Handmatig (41 pagina's), Handmatig (50 pagina's), Handmatig (40 pagina's), Veiligheidsprogrammering Manualline (48 pagina's), Communicatiehandleiding (36 pagina's), Handmatig (40 pagina's), Handmatig (25 pagina's), Handmatig (42 pagina's), Toepassing Beschrijving (50 pagina's), Handmatig (28 pagina's), Handmatig (33 pagina's), Handmatig (49 pagina's), Handmatig (36 pagina's), Handmatig (41 pagina's), Handmatig (46 pagina's), Handmatig (38 pagina's), Handmatig (35 pagina's), Handmatig (39 pagina's), Handmatig (28 pagina's), Handmatig (35 pagina's), Uitrustingshandleiding (35 pagina's), Handmatig (50 pagina's), Uitrustingshandleiding (32 pagina's), Uitrustingshandleiding (38 pagina's), Handmatig (29 pagina's), Uitrustingshandleiding (38 pagina's), Handmatig (34 pagina's), Handmatig (36 pagina's), Uitrustingshandleiding (50 pagina's), Handmatig (45 pagina's)

Pagina afdrukken

Siemens Simatic S7-1500 Configuratiehandleiding

3 Configuration

Configuring the access to the "Shared Device"

The previously implemented and networked ET 200SP station shall now be

configured as "Shared Device".

Proceed as follows:

1. In the graphical view, select the ET 200SP station and perform a double click.

Mark the head module to display the properties of the interface module in the

inspector window.

2. In the "modules parameters" menu, select "Shared Device". Here, you can

determine which IO controller can access the different modules.

Except for the modules "DI 8x24VDC ST_2" and "DQ 8x24VDC/0.5A ST_2", all

modules are assigned to "PLC_1". For those that are not assigned, select the

settings "---" in the "Access" column.

Figure 3-3

Result

The CPU 1516-3 PN/DP has now access to the modules assigned to it.

Note

Make sure that only one IO controller at a time has access to a module.

SharedDeviceKonfig

Entry ID: 109741600,

V1.0,

11/2016