Siemens Simatic S7-1500 Handmatig - Pagina 27

Blader online of download pdf Handmatig voor {categorie_naam} Siemens Simatic S7-1500. Siemens Simatic S7-1500 28 pagina's. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Ook voor Siemens Simatic S7-1500: Handmatig (40 pagina's), Handmatig (37 pagina's), Handmatig (47 pagina's), Handmatig (24 pagina's), Handmatig (34 pagina's), Gebruikershandleiding (45 pagina's), Handmatig (27 pagina's), Configuratiehandleiding (20 pagina's), Handmatig (47 pagina's), Handmatig (43 pagina's), Handmatig (48 pagina's), Handmatig (26 pagina's), Handmatig (50 pagina's), Handmatig (34 pagina's), Gebruikershandleiding (44 pagina's), Handmatig (50 pagina's), Handmatig (30 pagina's), Handmatig (41 pagina's), Handmatig (50 pagina's), Handmatig (40 pagina's), Veiligheidsprogrammering Manualline (48 pagina's), Communicatiehandleiding (36 pagina's), Handmatig (40 pagina's), Handmatig (25 pagina's), Handmatig (42 pagina's), Toepassing Beschrijving (50 pagina's), Handmatig (28 pagina's), Handmatig (33 pagina's), Handmatig (49 pagina's), Handmatig (36 pagina's), Handmatig (41 pagina's), Handmatig (46 pagina's), Handmatig (38 pagina's), Handmatig (35 pagina's), Handmatig (39 pagina's), Handmatig (28 pagina's), Handmatig (35 pagina's), Uitrustingshandleiding (35 pagina's), Handmatig (50 pagina's), Uitrustingshandleiding (32 pagina's), Uitrustingshandleiding (38 pagina's), Handmatig (29 pagina's), Uitrustingshandleiding (38 pagina's), Handmatig (34 pagina's), Handmatig (36 pagina's), Uitrustingshandleiding (50 pagina's), Handmatig (45 pagina's)

Pagina afdrukken

Parameter data records

B.1

Parameter assignment and structure of the parameter data records

Parameter assignment in the user program

You have the option to reconfigure the module in RUN (e.g. the input delay values

of selected channels can be edited without having an effect on the other channels).

Changing parameters in RUN

The WRREC instruction is used to transfer the parameters to the module using data records

0 to 15. The parameters set in STEP 7 will not be changed in the CPU, which means the

parameters set in STEP 7 will be valid after a restart.

Output parameter STATUS

The module ignores errors that occurred during the transfer of parameters with

the WRREC instruction and continues operation with the previous parameter assignment.

However, a corresponding error code is written to the STATUS output parameter.

The description of the WRREC instruction and the error codes are available in the

STEP 7 online help.

Assignment of data record and channel

The channel parameters of the module are included in data records 0 to 15

and are assigned as follows:

● Data record 0 for channel 0

● Data record 1 for channel 1

● ...

● Data record 14 for channel 14

● Data record 15 for channel 15

DI 16x24VDC HF Digital Input Module (6ES7521-1BH00-0AB0)

Manual, 01/2013, A5E03485952-01