Siemens Simatic S7-1500 Communicatiehandleiding - Pagina 31

Blader online of download pdf Communicatiehandleiding voor {categorie_naam} Siemens Simatic S7-1500. Siemens Simatic S7-1500 36 pagina's. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Ook voor Siemens Simatic S7-1500: Handmatig (40 pagina's), Handmatig (37 pagina's), Handmatig (47 pagina's), Handmatig (24 pagina's), Handmatig (34 pagina's), Gebruikershandleiding (45 pagina's), Handmatig (27 pagina's), Configuratiehandleiding (20 pagina's), Handmatig (47 pagina's), Handmatig (43 pagina's), Handmatig (48 pagina's), Handmatig (26 pagina's), Handmatig (28 pagina's), Handmatig (50 pagina's), Handmatig (34 pagina's), Gebruikershandleiding (44 pagina's), Handmatig (50 pagina's), Handmatig (30 pagina's), Handmatig (41 pagina's), Handmatig (50 pagina's), Handmatig (40 pagina's), Veiligheidsprogrammering Manualline (48 pagina's), Handmatig (40 pagina's), Handmatig (25 pagina's), Handmatig (42 pagina's), Toepassing Beschrijving (50 pagina's), Handmatig (28 pagina's), Handmatig (33 pagina's), Handmatig (49 pagina's), Handmatig (36 pagina's), Handmatig (41 pagina's), Handmatig (46 pagina's), Handmatig (38 pagina's), Handmatig (35 pagina's), Handmatig (39 pagina's), Handmatig (28 pagina's), Handmatig (35 pagina's), Uitrustingshandleiding (35 pagina's), Handmatig (50 pagina's), Uitrustingshandleiding (32 pagina's), Uitrustingshandleiding (38 pagina's), Handmatig (29 pagina's), Uitrustingshandleiding (38 pagina's), Handmatig (34 pagina's), Handmatig (36 pagina's), Uitrustingshandleiding (50 pagina's), Handmatig (45 pagina's)

Siemens Simatic S7-1500 Communicatiehandleiding
5 Installation and Commissioning
5.3.2

Commissioning the S7-1200 CPU

Table 5-2: Commissioning the S7-1200 CPU
No.
1.
Start STEP 7 (TIA Portal) and open the
"MBS_KNX" STEP 7 project from the
"109740160_KNX_S7_PROJ_Vxx.zip" file.
Note
The gateway's GSD file is installed
automatically.
Open "Devices & networks".
2.
3.
Right-click the connection and select
"Assign device name".
4.
Assign the PROFINET device name to the
S7-1200 CPU and the gateway.
1.
Select the device name you want to
assign.
Click "Update List". The suitable device
2.
type is automatically found in the network
and displayed in the list.
3.
From the list, select the device to which
you want to assign the selected name.
Click "Assign name".
4.
5.
1.
In the project tree, select the S7-1200
CPU (here: PLC_1).
In the menu bar, click the "Download to
2.
device" button.
Communication with S7 CPU via KNX Gateway
Entry ID: 109739689,
V1.0,
Action
06/2017
Comment
Requirement: You have STEP 7 (TIA Portal)
V14 or higher installed on your computer.
-
31