Siemens Simatic S7-1500 Handmatig - Pagina 19

Blader online of download pdf Handmatig voor {categorie_naam} Siemens Simatic S7-1500. Siemens Simatic S7-1500 39 pagina's. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Ook voor Siemens Simatic S7-1500: Handmatig (40 pagina's), Handmatig (37 pagina's), Handmatig (47 pagina's), Handmatig (24 pagina's), Handmatig (34 pagina's), Gebruikershandleiding (45 pagina's), Handmatig (27 pagina's), Configuratiehandleiding (20 pagina's), Handmatig (47 pagina's), Handmatig (43 pagina's), Handmatig (48 pagina's), Handmatig (26 pagina's), Handmatig (28 pagina's), Handmatig (50 pagina's), Handmatig (34 pagina's), Gebruikershandleiding (44 pagina's), Handmatig (50 pagina's), Handmatig (30 pagina's), Handmatig (41 pagina's), Handmatig (50 pagina's), Handmatig (40 pagina's), Veiligheidsprogrammering Manualline (48 pagina's), Communicatiehandleiding (36 pagina's), Handmatig (40 pagina's), Handmatig (25 pagina's), Handmatig (42 pagina's), Toepassing Beschrijving (50 pagina's), Handmatig (28 pagina's), Handmatig (33 pagina's), Handmatig (49 pagina's), Handmatig (36 pagina's), Handmatig (41 pagina's), Handmatig (46 pagina's), Handmatig (38 pagina's), Handmatig (35 pagina's), Handmatig (28 pagina's), Handmatig (35 pagina's), Uitrustingshandleiding (35 pagina's), Handmatig (50 pagina's), Uitrustingshandleiding (32 pagina's), Uitrustingshandleiding (38 pagina's), Handmatig (29 pagina's), Uitrustingshandleiding (38 pagina's), Handmatig (34 pagina's), Handmatig (36 pagina's), Uitrustingshandleiding (50 pagina's), Handmatig (45 pagina's)

Siemens Simatic S7-1500 Handmatig

Parameters / address space

4.1

Parameters

Parameters (GSD file)
The following table shows the general parameters for the IO-Link Master CM 8xIO-Link
communication module.
The default settings of the parameters are marked in bold in the "Value ranges" column.
Table 4-1  General parameters (GSD file)
Parameters
Diagnostics
Diagnostics: No supply voltage L+
Diagnostics: Port
Master parameter
Port Qualifier Information (PQI)
Port configuration without S7-PCT
The following table shows the port parameters for the IO-Link Master CM 8xIO-Link
communication module.
Parameters
Port configuration
Operating mode
Length of the input data*
Length of output data
* If PQI is activated, 1 byte less space remains for input data of the device. For example: GSD setting 16
bytes = 15 bytes + PQI
** Make sure not to exceed the maximum possible length of the input or output data for all ports.
*** Only effective if you use the "IO-Link Manual" port mode.
Communication module IO-Link Master CM 8xIO-Link (6ES7547-1JF00-0AB0)
Equipment Manual, 08/2022, A5E45488510-AB
Value range
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Value range
IO-Link Autostart
IO-Link Manual
DI
Deactivated
depending on the selected
input/output type**
depending on the selected
input/output type**
Effective range
Module
Port (channel)
Module
Module
Default
IO-Link Autostart
depending on the selected
input/output type**
depending on the selected
input/output type**
4
19