Siemens Simatic S7-300 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Siemens Simatic S7-300. Siemens Simatic S7-300 34 pagina's. Automation systems, controlling a physical axis
Ook voor Siemens Simatic S7-300: Handmatig (21 pagina's), Gebruiksaanwijzing (4 pagina's), Gebruiksaanwijzing (5 pagina's), Handmatig (35 pagina's), Aan de slag (8 pagina's), Aan de slag (16 pagina's), Toepassing Beschrijving (24 pagina's), Handmatig (18 pagina's), Handmatig (32 pagina's), Installatie- en hardwarehandleiding (20 pagina's), Aan de slag (32 pagina's)

Panel communication indicator: there are three LED indicators on the panel, and its working state

Indicator

PWR（Red）

TxD（Yellow）

RxD（Green）

3. Inner Diagram

Why the 24V power,RJ45 port and RS485 three parties all need to be isolated?That's because the

7 pin and 2 pin(output 24VDC power) and RS485 interface(DB9F socket 3、4、5、6、8、9pin) on

the PLC PROFIBUS socket are isolated,if the adapter is not isolated,it will damage the PLC

isolation system,then damage the PLC or cause interference.

You can put the ETH Adapter CN on your desk or install it on the rail of control cabinet.It has the

mounting bracket accessory.User can self-make an Aluminum board with thickness 1.5mm～

2.5mm,then install the adapter on the S7-300/400PLC rail or 35MM standard rail.

as the following table:

Light on

Power supply normal

Fault or signal

polarity reversal

Fault or signal

polarity reversal

Flash

Fault

Serial port is

receiving the date

Serial port is

sending the date

- 8 -

Extinguish

Fault or no power

Fault or no

communication

Fault or no

communication