Siemens Simatic S7-300 Toepassing Beschrijving - Pagina 22

Blader online of download pdf Toepassing Beschrijving voor {categorie_naam} Siemens Simatic S7-300. Siemens Simatic S7-300 24 pagina's. Automation systems, controlling a physical axis
Ook voor Siemens Simatic S7-300: Gebruikershandleiding (34 pagina's), Handmatig (21 pagina's), Gebruiksaanwijzing (4 pagina's), Gebruiksaanwijzing (5 pagina's), Handmatig (35 pagina's), Aan de slag (8 pagina's), Aan de slag (16 pagina's), Handmatig (18 pagina's), Handmatig (32 pagina's), Installatie- en hardwarehandleiding (20 pagina's), Aan de slag (32 pagina's)

Pagina afdrukken
Siemens Simatic S7-300 Toepassing Beschrijving
5 Operation of the application
5.2 Scenario B
Table 5-3 Output interface of FB285
Output
signal
Error
ErrorId
PwrInhibit
Busy
VeloAct
DiagId
In scenario B, we will use FB285 in the library for programming and run the motor.
Table 5-4 Operation with FB285
Nr.
1.
When you have installed the library, you can find it at the
library view as follows:
Speed control with SINAMICS V90 and S7-300 via Profinet
Entry-ID: 109743898,
V1.0,
Type
Default
BOOL
INT
BOOL
BOOL
REAL
0.0 [rpm]
WORD
Action
07/2016
0
1 = general fault active
0
Mode fault / block fault:
0=no fault active
1=drive fault active
2=drive switching on inhibited active
3=error of the SFB call active
Switching on inhibited active 
0
PwrInhibit=1
0
Mode is being executed or enabled
Current velocity  dependent on
scaling factor FactRPM
Extended communication error 
0
error during SFB call
Meaning
Remarks
22