Siemens Simatic S7-300 Handmatig - Pagina 9

Blader online of download pdf Handmatig voor {categorie_naam} Siemens Simatic S7-300. Siemens Simatic S7-300 18 pagina's. Automation systems, controlling a physical axis
Ook voor Siemens Simatic S7-300: Gebruikershandleiding (34 pagina's), Handmatig (21 pagina's), Gebruiksaanwijzing (4 pagina's), Gebruiksaanwijzing (5 pagina's), Handmatig (35 pagina's), Aan de slag (8 pagina's), Aan de slag (16 pagina's), Toepassing Beschrijving (24 pagina's), Handmatig (32 pagina's), Installatie- en hardwarehandleiding (20 pagina's), Aan de slag (32 pagina's)

Setup Items

Set up the Display's communication settings in GP Pro-EX or in the Display's off-line mode.

The setting of each parameter must match that of the External Device.



"3 Communication Settings" (page 7)

4.1

GP-Pro EX Setup Items

 Communication Settings

To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC].

Setup Items

Port No.

Timeout

Retry

Wait To Send

GP-Pro EX Device/PLC Connection Manual

Enter a port number of the Display, using 1024 to 65535. Check into [Auto], and a port

number is set automatically.

Use an integer from 1 to 127 to enter the time (s) for which Display waits for the response

from External Device.

In case of no response from the External Device, use an integer from 0 to 255 to enter how

many times the Display retransmits the command.

Use an integer from 0 to 255 to enter standby time (ms) for the Display from receiving

packets to transmitting next commands.

Ethernet Gateway for SIMATIC MPI/PROFIBUS Driver

Setup Description