Siemens Simatic S7-400 Aan de slag - Pagina 13

Blader online of download pdf Aan de slag voor {categorie_naam} Siemens Simatic S7-400. Siemens Simatic S7-400 36 pagina's. Block library motor starter sirius for simatic pcs 7 sirius motor starter pcs 7 library v7.1+sp2 / sirius motor starter pcs 7 library v8 migration 8.0+sp1
Ook voor Siemens Simatic S7-400: Handmatig (35 pagina's), Handmatig (18 pagina's)

Pagina afdrukken

1. Table of Contents

Step Action

Select SIMATIC Manager: "Options > Set PG/PC interface".

The dialog box "Set PG/PC Interface" opens.

Setting the PG/PC interface

Select the option "PC internal (local)"as the "Interface Parameter Assignment Used" and click on "OK".

The PG/PC interface is set to "PC internal (local)".

Open HW Config again.

•

Click on "PLC Download".

•

Select all target modules.

•

Click "OK".

•

The download starts. After the download, select "Station > Exit".

•

Check the configuration in the Station Configuration Editor.

•

For additional information on setting the PC station as an OS, refer to the PCS 7 Getting

Started manuals.

SIRIUS Motor Starter PCS 7 Library "V7.1+SP2"/ "V8 Migration V8.0+SP1"

Getting Started, 08/2013, A5E02897539020A/RS-AA/005

First steps for the project

2.1 Configuration of PC station