Siemens SINAMICS G120P Gebruiksaanwijzing - Pagina 11

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Siemens SINAMICS G120P. Siemens SINAMICS G120P 22 pagina's. Line reactors for power modules pm330
Ook voor Siemens SINAMICS G120P: Gebruiksaanwijzing (28 pagina's), Gebruiksaanwijzing (26 pagina's), Gebruiksaanwijzing (34 pagina's), Gebruiksaanwijzing (24 pagina's), Gebruiksaanwijzing (26 pagina's), Gebruiksaanwijzing (22 pagina's), Gebruiksaanwijzing (22 pagina's), Handmatig (18 pagina's), Gebruiksaanwijzing (18 pagina's)

Limiting the voltage rate of rise and voltage peaks using an output reactor and dv/dt filter

Fast-switching IGBTs in the converter result in high voltage gradients dv/dt at the converter

output. If long motor cables are used, this leads to an additional current load on the

converter due to capacitive charge/discharge currents. The high voltage gradients, and the

resulting transients at the motor terminals, cause the motors' electrical winding load to

increase as compared with direct on-line operation. In conjunction with the connected cable

capacitances, the output reactors with their adapted inductances reduce the capacitive

charge/discharge currents in the motor cables and, as a function of these motor cables, limit

the voltage gradient (dv/dt) and the transients Û

Figure 2-1

Output reactors

Operating Instructions, 05/2017, A5E32846921B AE

Limiting the voltage rate of rise and voltage peaks using an output reactor and dv/dt filter

at the motor terminals.

General