Siemens SINAMICS S120 Handmatig - Pagina 31

Blader online of download pdf Handmatig voor {categorie_naam} Siemens SINAMICS S120. Siemens SINAMICS S120 43 pagina's. Applications for cabinet modules, liquid-cooled
Ook voor Siemens SINAMICS S120: Bedieningshandleiding (20 pagina's), Aan de slag (32 pagina's), Handmatig (41 pagina's), Korte beschrijving (22 pagina's), Instructie voor installatie in kasten voor aandrijving op zee (28 pagina's), Handleiding voor toepassingen (34 pagina's), Handleiding voor toepassingen (46 pagina's), Gebruiksaanwijzing (22 pagina's), Aan de slag (32 pagina's), Gebruiksaanwijzing (21 pagina's), Engineering Handleiding (30 pagina's), Inbedrijfstellingshandleiding (20 pagina's)

Pagina afdrukken
Siemens SINAMICS S120 Handmatig
SINAMICS S120 Fail-Safe Drives
Description
For drive_1 set the following:
Bit0: Control Unit DI1
Bit1: TM54F F-DI1
Bit2: 0
Bit3: Control Unit DI3
Fixed value 1 : 20 rpm
Fixed value 3 : 800 rpm
Fixed value 9 : 1000 rpm
Fixed value 11 : 1000 rpm
Explanation: If the "SLS_door1"
signal is active (in the dia-
gram: "High"), the safety door
is closed and the high speed
setpoint is entered. For a low
signal, a changeover is made
from a high speed (setpoint) to
a low speed (setpoint).
By pressing –S8, when the drive
is operational, independent of the
state of the safety door, a fixed
speed of n=1000 rpm is entered
(speed setpoint). The drive can
only operate for a 1 signal at bit 0.
The reason for this is that DI1 of
the Control Unit is also intercon-
nected with ON/OFF1.
Set the OFF3 ramp-down time
and the standard ramp-down time
under the point Setpoint Channel
/ Ramp-function generator.
I DT Safety Integrated
Comment
Page 31/43
Entry ID: 28424136
MC-FE-I-005-V11-EN