Siemens SINUMERIK 808D Gebruiksaanwijzing - Pagina 32
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Siemens SINUMERIK 808D. Siemens SINUMERIK 808D 34 pagina's. Connecting with v60 driver
Ook voor Siemens SINUMERIK 808D: Servicehandleiding (46 pagina's), Servicehandleiding (48 pagina's), Instructies (2 pagina's), Installatiehandleiding (48 pagina's)
Pagina afdrukken
Appendix
A.2 Cutting reserved holes
A.2
Cutting reserved holes
On the MCP, three reserved holes with a standard diameter of 16 mm are available for you
to install necessary devices according to your own needs:
Figure A-1
To cut a reserved hole, proceed as follows:
1
2
Figure A-2
Cutting reserved holes
32
Reserved holes
Mechanical Installation Manual
Operating Instructions, 12/2012, 6FC5397-2EP10-0BA0