Siemens SINUMERIK 840D sl Bedieningshandleiding - Pagina 16

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Siemens SINUMERIK 840D sl. Siemens SINUMERIK 840D sl 33 pagina's. Operator panel front: op 010s
Ook voor Siemens SINUMERIK 840D sl: Upgrade-instructies (4 pagina's), Upgrade-instructies (5 pagina's), Inbedrijfstellingshandleiding (36 pagina's), Upgrade-instructies (3 pagina's), Upgrade-instructies (3 pagina's), Systeemhandleiding (44 pagina's), Uitrustingshandleiding (28 pagina's), Uitrustingshandleiding (48 pagina's), Uitrustingshandleiding (26 pagina's), Uitrustingshandleiding (28 pagina's)

Pagina afdrukken
Siemens SINUMERIK 840D sl Bedieningshandleiding
Overview of the program data
2.5 Configuring filters
Filter criteria
Filter criterion
Program name
Program type
Release ID
Trial cut ID
Modification date
Length
16
Description
Name of the program with a maximum of 255 characters.
The following program types are available for selection:
MPF for main programs
•
SPF for subprograms
•
TXT, PDF, ... for text files
•
JPG, PNG; ... for graphic files
•
Freely editable data that you can save on the server in the program type
•
table.
Selection of:
No
•
Yes
•
The release identifier acts only on NC programs for execution in the NC.
Programs with the same name can only be allocated a "YES" release once.
Selection of:
No
•
Yes
•
The trial cut ID acts only on NC programs for execution in the NC.
Limit the change date of NC data by entering "from" / "to".
Specify the date as a contiguous number:
Year: four-digit
•
Month: two-digit
•
Day: two-digit
•
Limit the length of NC data in bytes by entering "from" / "to".
MCIS DNC - Direct Numerical Control
Operating Manual, 09/2011, 6FC5398-7DP20-1BA0