Siemens SINUMERIK 840D sl Bedieningshandleiding - Pagina 19

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Siemens SINUMERIK 840D sl. Siemens SINUMERIK 840D sl 33 pagina's. Operator panel front: op 010s
Ook voor Siemens SINUMERIK 840D sl: Upgrade-instructies (4 pagina's), Upgrade-instructies (5 pagina's), Inbedrijfstellingshandleiding (36 pagina's), Upgrade-instructies (3 pagina's), Upgrade-instructies (3 pagina's), Systeemhandleiding (44 pagina's), Uitrustingshandleiding (28 pagina's), Uitrustingshandleiding (48 pagina's), Uitrustingshandleiding (26 pagina's), Uitrustingshandleiding (28 pagina's)

2.5.4

Edit filters

You have the option of recalling already saved filter settings in order to use them for filtering

or to edit the filter settings.

Select filter

Saving the filter under a different name

Reset filter

MCIS DNC - Direct Numerical Control

Siemens Automation Parts

Operating Manual, 09/2011, 6FC5398-7DP20-1BA0

The "Saved filters" window is opened.

In the selection box, you can display the existing filters in alphabetical

order.

Select the desired filter using the cursor and click the "OK" softkey.

The filter settings are displayed.

If you changed the settings of a filter that has been saved, then save the

filter under a different name.

Press the "Save as" softkey.

The "Save filter as" window is opened.

Enter the new filter name and optionally a new comment.

Press the "OK" softkey to confirm your entry.

The filter settings are applied and activated as a temporary filter.

Press the softkey "Reset filter", to reset the filter criteria that were

individually set.

If you saved the filter that was reset under the same name, then the

conditions are retained.

Overview of the program data

2.5 Configuring filters