Siemens SINUMERIK 840D sl Bedieningshandleiding - Pagina 24

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Siemens SINUMERIK 840D sl. Siemens SINUMERIK 840D sl 33 pagina's. Operator panel front: op 010s
Ook voor Siemens SINUMERIK 840D sl: Upgrade-instructies (4 pagina's), Upgrade-instructies (5 pagina's), Inbedrijfstellingshandleiding (36 pagina's), Upgrade-instructies (3 pagina's), Upgrade-instructies (3 pagina's), Systeemhandleiding (44 pagina's), Uitrustingshandleiding (28 pagina's), Uitrustingshandleiding (48 pagina's), Uitrustingshandleiding (26 pagina's), Uitrustingshandleiding (28 pagina's)

Overview of the program data

2.7 File properties

2.7.2

Entering a comment

For every file saved in the DNC program system, you can enter any comment as remark.

Precondition

To enter a comment, you need the corresponding access rights.

The access rights are defined on the DNC server.

Procedure

For each file to be stored in the DNC program system, additional files can be assigned as

so-called "Attachments".

You can view the files if an appropriate editor has been implemented.

Following attachments are possible:

● Text files

● PDF files

● Graphics

● SVG

Select the file.

Press the softkey "comment", in order to open the input window.

Enter a unique text.

Press the "OK" softkey to save the comment together with the program

data.

The comment window is closed again.

- OR -

Press the "Cancel" softkey to close the input window without saving.

MCIS DNC - Direct Numerical Control

Operating Manual, 09/2011, 6FC5398-7DP20-1BA0