Siemens SINUMERIK 840D sl Upgrade-instructies - Pagina 3

Blader online of download pdf Upgrade-instructies voor {categorie_naam} Siemens SINUMERIK 840D sl. Siemens SINUMERIK 840D sl 3 pagina's. Operator panel front: op 010s
Ook voor Siemens SINUMERIK 840D sl: Upgrade-instructies (4 pagina's), Upgrade-instructies (5 pagina's), Bedieningshandleiding (33 pagina's), Inbedrijfstellingshandleiding (36 pagina's), Upgrade-instructies (3 pagina's), Systeemhandleiding (44 pagina's), Uitrustingshandleiding (28 pagina's), Uitrustingshandleiding (48 pagina's), Uitrustingshandleiding (26 pagina's), Uitrustingshandleiding (28 pagina's)

Pagina afdrukken

SINUMERIK 840D sl

AP01583052

AP01584985

AP01589476

AP01589524

AP01592058

AP01594397

AP01597712

AP01598853

====================================================================

Compatibility

====================================================================

SINUMERIK Operate 4.5 SP4 HF3 can be combined with 840D sl NCU 7x0.3 with CNC SW 4.5 SP4 HF3.

The help system is based on the documentation for the CNC SW 4.5 SP2.

The NC alarm texts are based on the CNC SW 4.5 SP2 .

====================================================================

Notes

====================================================================

System:

If, in combination with STEP7, no communication is established between the HMI and the NCU, please

check the settings made under Control Panel / PG/PC interface. There, in addition to S7ONLINE, an access

point

SINUMERIK_CP (SINUMERIK 7xx) -> TCP/IP -> <network card>

must be provided. If required, configure this access point as specified.

To operate the simulation, the NC MD $MC_FRAME_ACS_SET must be set to 1.

If the PC is connected via the network to the X130 of the NCU, the simulation cannot run.

The screen size of Operate on the PC monitor can be set in the file <installation

directory>\user\sinumerik\hmi\cfg\slrs.xml.

[Global]

Resolution =

The new function "network diagnostics" cannot be used on the PC.

In the Machine area, the "Retraction" softkey is no longer available as standard. It can be reactivated by

creating the slmaconfig.xml in /oem/sinumerik/hmi/cfg file with the following content:

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

</Settings></CONFIGURATION>

Upgrade Instructions

SINUMERIK Operate 4.5 SP4 HF3 for PC

AP01585041

AP01589615

AP01594591

; Permissible values: 640x480, 800x600, 1024x768, 1280x1024

AP01585860

AP01587126

AP01589966

AP01590460

AP01595100

AP01595394

2014-12-16

AP01588294

AP01590715

AP01596303

Page 3 of 3