Siemens SIREMOBIL Compact L Handleiding voor installatie- en instellingsinstructies - Pagina 13
Blader online of download pdf Handleiding voor installatie- en instellingsinstructies voor {categorie_naam} Siemens SIREMOBIL Compact L. Siemens SIREMOBIL Compact L 28 pagina's.
Ook voor Siemens SIREMOBIL Compact L: Installatie- en instellingsinstructies (4 pagina's), Gebruiksaanwijzing (21 pagina's), Handleiding voor installatie-instructies (6 pagina's)
Pagina afdrukken
Removing the lifting column
Board D2
•
Unscrew the grounding strap from the intermediate plate.
•
Remove the intermediate plate.
•
Unscrew the ground bracket from the heat sink, it remains on the board (1/Fig. 3).
•
Pull all connectors off from the board.
•
Unscrew the 6 spacer screws.
•
Unscrew the board from the heat sink (1/Fig. 4).
•
Remove the board and place it on a surface suitable for ESD.
•
Unscrew the grounding strap from the heat sink (5/Fig. 5).
•
Unscrew the protective conductor.
•
Unscrew the 6 fastening screws of the heat sink.
•
Lift out the heat sink.
Line filter
•
Pull off the lower connectors of the line filter.
•
Unscrew the line filter.
•
Unscrew all protective conductors from the base plate of the line filter (2/Fig. 5).
•
Unplug the BNC connector (X1) and unscrew the BNC plug (3/Fig. 5).
•
Unscrew the grounding strap from the base plate (4/Fig. 5).
•
Unscrew the base plate and unscrew the studs from the lifting column.
Switched-mode power supply M 14
•
Pull the connectors X2 and X3 from the power supply; the protective conductor can
remain connected.
•
Remove the switched-mode power supply;
to do this only loosen the two upper nuts and unscrew the lower nut.
Stabilization bracket
•
Unscrew the stabilization bracket of the monitor cable plug from the lifting column
(1/Fig. 6).
Siemens AG
Medical Solutions
n.a.
SPR2-130.841.02
Rev. 01
Page 3 of 6
07.05
CS PS 24
2 - 3
2
2
2
2
SIREMOBIL Compact L
System Manual