Siemens SIREMOBIL Iso-C Installatie- en instellingsinstructies - Pagina 4

Blader online of download pdf Installatie- en instellingsinstructies voor {categorie_naam} Siemens SIREMOBIL Iso-C. Siemens SIREMOBIL Iso-C 4 pagina's.
Ook voor Siemens SIREMOBIL Iso-C: Servicehandleiding (16 pagina's), Handleiding voor installatie- en instellingsinstructies (6 pagina's), Onderhoudsinstructie (46 pagina's), Handleiding voor installatie-instructies (6 pagina's)

Pagina afdrukken
Siemens SIREMOBIL Iso-C Installatie- en instellingsinstructies
4
Programming
•
Switch the system on.
•
Simultaneously press keys [CTRL] and [U] on the memory keyboard.
•
Configure the video recorder output for monitor A.
(Perform the configuration for monitor B only by special customer request).
•
End the "user menu".
•
Switch the SIREMOBIL Iso-C off and on again to activate the new configuration.
Function check
•
Set the video recorder to record.
•
With Fluoro, move the collimator blades slightly into the field.
Release fluoro for approximately 20 seconds.
•
Stop the video recorder and rewind the tape.
•
Replay the scene.
Concluding work
•
Switch OFF the SIREMOBIL.
•
Check the protective conductor function using the protective conductor meter 44 15 899
RV. Refer also to TI 236 / ARTD - 002.731.17...
Changes to previous version
Page 3: Paragraph "Line voltage cable" changed.
TD SD 24 / Arnold
SIREMOBIL Iso-C
Installing and setting the Video Recorder
This calls the "User Setup menu" for Memoskop.
Register 3
TD SD 24/ Schlee
SPR2-230.033.03
Rev. 03
10.99
SMS Iselin / Ristau
Page 4 of 4
TD SD 24
Medical Engineering
1
1
1
1
Siemens AG