Siemens SIREMOBIL Iso-C Handleiding voor installatie-instructies - Pagina 6
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Siemens SIREMOBIL Iso-C. Siemens SIREMOBIL Iso-C 6 pagina's.
Ook voor Siemens SIREMOBIL Iso-C: Installatie- en instellingsinstructies (4 pagina's), Servicehandleiding (16 pagina's), Handleiding voor installatie- en instellingsinstructies (6 pagina's), Onderhoudsinstructie (46 pagina's)
Pagina afdrukken
6
Installing the paneling
•
Reattach the protective plate behind the keyboard in the logbook compartment.
Take care that the cables are not squeezed.
•
Refit the paneling of the logbook compartment. Make sure the ground wire connections
are correct when doing this.
•
Reinstall the rear paneling of the monitor trolley. Make sure the ground wire connections
are correct when doing this.
Final work
•
After all work has been completed and all covers have been attached perform the protec-
tive conductor test according to ARTD-002.731.17... The protective conductor resis-
tance must not exceed 0.2 Ohm.
•
Add these instructions to the system manual of the product.
•
File the Addendum/Supplement to the Operating Instructions included in the scope of
supply into the existing operating instructions.
Customer information
•
Demonstrate the function of the key switch.
•
Hand over the keys.
•
Hand over the operating instructions.
SIREMOBIL
System Manual
Installation and Startup
SPR2-130.812.06
Rev. 01
12.02
Page 6 of 6
CS PS 24
1
1
1
Siemens AG
Medical Solutions