Epson XP-850 Start Here - Pagina 3

Blader online of download pdf Start Here voor {categorie_naam} Epson XP-850. Epson XP-850 4 pagina's. Impresora small-in-one
Ook voor Epson XP-850: Opstarthandleiding (4 pagina's), Brochure (2 pagina's), Handleiding voor bereik (7 pagina's), Basishandleiding (30 pagina's), Start Here (2 pagina's), (Installatiegids (4 pagina's)

Pagina afdrukken

Connect the fax line

To fax, connect a phone cord to a telephone wall jack and

to the LINE port on the back of your product. To connect a

telephone or answering machine, use the EXT. port on your

product. See the online User's Guide for more details.

Note: If you're connecting to a DSL phone line, you must use a DSL

filter or you won't be able to fax. Contact your DSL provider for the

necessary filter.

Install software

Note: If your computer does not have a CD/DVD drive, you can

download the software from the Epson website (see "Epson technical

support").

Caution: Be sure to close your other programs, including any screen

savers and virus protection software, before beginning this software

installation.

M ake sure the printer is

NOT CONNECTED to your

computer.

Windows

: If you see a Found New

Hardware screen, click Cancel and

disconnect the USB cable. You can't

install your software that way.

Insert the product CD.

W indows: If you see the AutoPlay window, click Run

Setup.exe. If you see the User Account Control screen,

click Yes or Continue.

M ac OS X: Double-click the

necessary.

C lick Install (Windows) or Continue (Mac OS X) and

follow the instructions on your computer screen.

W hen you see the Select Your Connection screen, check

the "Connection options" section on this sheet for more

information.

C hoose your connection. Then click Next (Windows) or

Continue (Mac OS X) and follow the instructions on your

computer screen.

Epson icon, if

Connection options

Wireless connection

You must install the software on every computer from which

you want to print. For the first installation, we recommend using

a USB cable (not included) to simplify wireless setup. After the

printer is connected to the network, you will be prompted to

remove the cable.

If you're using Mac OS X 10.6.x, 10.7.x, or 10.8.x, or you don't

have a USB cable, you will need to use the control panel on

the printer to select wireless settings. Follow the instructions

on your computer screen during software installation; they will

explain how to connect the printer wirelessly this way.

M ake sure you know your network name (SSID) and network

password:

• Network name

• Network password

If you don't have this information, contact the person who set

up your network.

To view how-to videos on setting up your printer's wireless

connection, go to epson.com/support (U.S.) or epson.ca/

support (Canada).

Direct USB connection

Make sure you have a USB cable (not included).

Wired network connection

Make sure you have an Ethernet

You must install the software on every computer from which

you want to print.

Any problems?

If you experience problems during setup, see below:

Network setup was unsuccessful.

• Make sure you select the right network name (SSID).

• If you see a firewall alert message, click Unblock or Allow to

let setup continue.

• If your network has security enabled, make sure you enter

your network password (WEP key or WPA passphrase)

correctly. Passwords are case sensitive. Be sure to

correctly enter uppercase, lowercase, and numeric/special

characters.

Press the touch screen buttons repeatedly to scroll through

characters.

Press

to move the cursor.

Press

to delete.

Press Done when you're finished entering your password.

You see error messages on the printer's screen.

See your Quick Guide for troubleshooting information.

network cable (not included).