Cisco WS-X5161 Handmatig - Pagina 17

Blader online of download pdf Handmatig voor {categorie_naam} Cisco WS-X5161. Cisco WS-X5161 33 pagina's. Configuring token ring lan emulation
Ook voor Cisco WS-X5161: Product ondersteunings bulletin (6 pagina's)

Pagina afdrukken

Binding the LECS to the ATM Interface

Command or Action

Step 5 ATM(lane-config-database)#

nameelan -name2local-seg-

idsegment-number

Step 6 ATM(lane-config-database)#

client-atm-addressatm-

address-templatenameelan-

name

Step 7 ATM(lane-config-database)#

exit

Binding the LECS to the ATM Interface

Once you have created the database entries as appropriate to the type and the membership conditions of the

ELANs, to enable the LECS on the selected ATM interface and switch, use the following commands

beginning in global configuration mode:

SUMMARY STEPS

1. ATM(config)# interface atmnumber

2. ATM(config-if)# lane config auto-config-atm-address

3. ATM(config-if)# lane config databasedatabase-name

4. ATM(config-if)# exit

5. ATM# copy running-config startup-config

DETAILED STEPS

Command or Action

Step 1 ATM(config)# interface atmnumber

Step 2 ATM(config-if)# lane config auto-config-atm-

address

Step 3 ATM(config-if)# lane config

databasedatabase-name

Purpose

Assigns a segment number to the second emulated Token Ring LAN in the

configuration database.

The segment number you specify for the local-seg-id keyword must be identical to the

ring number of the TrCRF. The set vlaninterface configuration command assumes that

any ring number you enter is in hexadecimal. The name elan-name local-seg-id

segment-number LANE database configuration command assumes that any value you

enter for the local-seg-id keyword is in decimal unless you enter it explicitly in

hexadecimal.

Repeat this step, providing a different ELAN name and segment number for each

additional source-route bridged ELAN in this switch cloud.

Adds a database entry associating a specific client's ATM address with a specific

restricted-membership ELAN.

Repeat this step for each of the clients of each of the restricted-membership ELANs on

the switch cloud, in each case specifying that client's ATM address and the name of the

ELAN with which it is linked.

Exits from database configuration mode and returns to global configuration mode.

Purpose

If you are not currently configuring the interface, specifies the major

ATM interface where the LECS is located and enters interface

configuration mode.

Specifies that the LECS's ATM address will be computed by the

automatic method.

Binds the LECS's database name to the specified major interface, and

enables the LECS.

Setting Up the Database for Restricted-Membership ELANs