Cisco WS-X6066-SLB-APC - Content Switching Module Installatie Opmerking - Pagina 17
Blader online of download pdf Installatie Opmerking voor {categorie_naam} Cisco WS-X6066-SLB-APC - Content Switching Module. Cisco WS-X6066-SLB-APC - Content Switching Module 28 pagina's. Catalyst 6500 series switch content switching module
Pagina afdrukken
Figure 4
Note
Tighten the two captive installation screws on the supervisor engine or module.
e.
Note
Vertical slots
Position the supervisor engine or switching module in the slot. (See
a.
align the sides of the switching-module carrier with the slot guides on the top and bottom of the slot.
78-15751-03
Ejector Lever Closure in a Horizontal Slot Chassis
WS-X6K-SU P2-2GE
1
CONSOLE
PORT
MODE
CONSOLE
SUPERVIS OR2
PCMCIA
WS-X6K-SU P2-2GE
2
CONSOLE
PORT
MODE
CONSOLE
SUPERVIS OR2
PCMCIA
3
4
WS-C650 0-SFM
5
SWITCH FABRIC MDL
6
Ejector levers flush
with module faceplate
Failure to fully seat the module in the backplane connector can result in error messages.
Make sure that the ejector levers are fully closed before tightening the captive installation
screws.
Switch
Load
100%
PORT 1
EJECT
1%
Switch
Load
100%
PORT 1
EJECT
1%
Catalyst 6500 Series Switch Content Switching Module Installation Note
Installing the CSM
PORT 2
PORT 2
Figure
5.) Make sure that you
17