Epson 1705C - PowerLite XGA LCD Projector Snelle installatie

Blader online of download pdf Snelle installatie voor {categorie_naam} Epson 1705C - PowerLite XGA LCD Projector. Epson 1705C - PowerLite XGA LCD Projector 4 pagina's. Release of check tool for network projectors v1.00 for windows
Ook voor Epson 1705C - PowerLite XGA LCD Projector: Gebruikershandleiding (42 pagina's), Bedieningshandleiding (36 pagina's), Bedieningshandleiding (47 pagina's), Installatiehandleiding (19 pagina's), Gebruikershandleiding (1 pagina's), Onderdelenlijst (1 pagina's), Documentatie bijwerken (12 pagina's), Functiehandboek (5 pagina's), Specificaties (2 pagina's), Software Handleiding (2 pagina's), Product ondersteunings bulletin (25 pagina's), Product ondersteunings bulletin (22 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (41 pagina's), Product ondersteunings bulletin (34 pagina's), Product ondersteunings bulletin (28 pagina's), Product ondersteunings bulletin (15 pagina's), Product ondersteunings bulletin (22 pagina's), Snelstarthandleiding (3 pagina's)

Pagina afdrukken
Epson 1705C - PowerLite XGA LCD Projector Snelle installatie
1
Turn On Your Equipment
1
C onnect the power cord to the back of the projector and plug the other
end into an electrical outlet.
2
Open the A/V Mute slide. Make sure the slide is opened completely.
3
R emove the battery cover on the remote control. Locate the two AAA
batteries that came with the projector and insert them. Then replace
the battery cover.
4
T o turn the projector on, press the Power button on the projector or
the remote control. The projector beeps once, and the projector's
Power light flashes green and then stays on.
Power button
CAUTION: Before unplugging the projector...
Shut the projector down properly:
1. Press the
2. When the orange light stops flashing and the projector beeps,
you can unplug the projector.
2

Adjust the Image

1
T o raise the image, press the blue foot release button for the front
adjustable foot and lift the front. Release the button to lock the
foot in position.
PowerLite
Power button twice.
®
Quick Setup
1705c/ 1715c