Epson 1710C - PowerLite XGA LCD Projector Installatiehandleiding - Pagina 13
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Epson 1710C - PowerLite XGA LCD Projector. Epson 1710C - PowerLite XGA LCD Projector 19 pagina's. User replaceable parts list
Ook voor Epson 1710C - PowerLite XGA LCD Projector: Snelle installatie (2 pagina's), Gebruikershandleiding (1 pagina's), Onderdelenlijst (1 pagina's), Specificaties (2 pagina's)
Pagina afdrukken
Leveling the Mounting bracket
1.
Rotate the leveling barrels to level the mounting bracket next, position the mounting bracket so that it
avoids most, if not all, ventilation points (including lamp & filter access doors).
2.
When the position desired is achieved tighten the mounting hardware to the projector then tighten the hex
head leg screws with the Allen wrench (supplied) (Figure 8 and Figure 9).
CAUTION:
Secure but do not over-tighten the mounting hardware. Failure to do so will result in
damaging the threads in the projector.
Level
DOWN
Page - 14 -
Allen Wrench
Adjusting the Mount
UP
Figure 8
ELPMBUNI
Inverted Projector
Leveling
Barrels
Installation Manual