Samsung 400FP-2 - SyncMaster - 40" LCD Flat Panel Display Snelstarthandleiding - Pagina 11
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Samsung 400FP-2 - SyncMaster - 40" LCD Flat Panel Display. Samsung 400FP-2 - SyncMaster - 40" LCD Flat Panel Display 39 pagina's. Samsung lcd monitor quick start guide
Ook voor Samsung 400FP-2 - SyncMaster - 40" LCD Flat Panel Display: Specificaties (2 pagina's), (Snelstartgids (39 pagina's), (Koreaanse) Snelstarthandleiding (36 pagina's)
Pagina afdrukken
4. DEL
button
5. + VOL -
6.
MUTE
7. TV/DTV
8.
MENU
9.
10.
INFO
11.COLOR BUTTONS
12.
TTX/MIX
13.STILL
14.AUTO
15. S.MODE
16.MDC
17.LOCK
18.
SOURCE
19.
ENTER/PRE-CH
20. CH/P
21.D.MENU
Introduction
The "-" button operates only for DTV. It is used to select
MMS (multi-channel) for a DTV.
Adjusts the audio volume.
Pauses (mutes) the audio output temporarily. This is dis-
played on the lower left corner of the screen. The audio
resumes if MUTE or - VOL + is pressed in the Mute mode.
Selects the TV and DTV mode directly.
Opens the on-screen menu and exits from the menu or
closes the adjustment menu.
Activates a highlighted menu item.
Current picture information is displayed on the upper left
corner of the screen.
Press to add or delete channels and to store channels to the
favorite channel list in the "Channel List" menu.
TV channels provide written information services via tele-
text.
- Teletext Buttons
For more information > TTX / MIX
Press the button once to freeze the screen. Press it again
to unfreeze.
Adjusts the screen display automatically in PC mode. By
changing the resolution in the control panel, auto function is
performed.
When pressing this button, the current mode is displayed at
the bottom centre of the screen. The LCD Display has a
built-in high fidelity stereo amplifier. Then press the button
again to circle through available preconfigured modes.
( Standard ! ' Music ! ' Movie ! ' Speech ! ' Custom )
MDC Quick Launch Button.
Activates or deactivates all function keys on both the remote
control and the LCD Display except for the Power and LOCK
buttons.
Press the button to change the input signal SOURCE.
Changing the SOURCE is only allowed for external devices
that are connected to the monitor at the time.
This button is used to return to the immediately previous
channel.
In TV mode, selects TV channels.
DTV menu display