Samsung 5 Series Gebruikershandleiding - Pagina 23

Pagina afdrukken

INPUT / SUPPORT

Configuring the Input Menu

Source List

❑

Use to select TV or other external input sources such as DVD / Blu-ray players / Satellite

receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice.

Press the SOURCE button on the remote control to view an external signal source.

TV mode can be selected by pressing the TV button.

TV / AV / AV / Component / Component / PC / HDMI / HDMI / HDMI(DVI) / HDMI4 /



USB

You can choose only those external devices that are connected to the TV. In the Source

List, connected inputs will be highlighted and sorted to the top. Inputs that are not

connected will be sorted to the botton.

PC always stay activated.

Using the Colour buttons on the remote with the Source list

–

Red (Refresh): Refreshes the connecting external devices.

–

TOOLS (Tools): Displays the Edit Name and Information menus.

Edit Name

❑

Name the device connected to the input jacks to make your input source selection easier.

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI / DVI PC / TV / IPTV / Blu-ray



/ HD DVD / DMA

When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN (DVI) port, you should set the HDMI/DVI

mode to DVI PC in the Edit Name of the Input mode.

When connecting an HDMI/DVI cable to the HDMI IN (DVI) port, you should set the HDMI/DVI mode to DVI or DVI PC in

the Edit Name of the Input mode. In this case, a separate sound connection is required.

Configuring the Support Menu

Self Diagnosis

❑

Picture Test



If you think you have a picture problem, perform the picture test. Check the colour pattern on

the screen to see if the problem still exists.

●

Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes.

There may be a problem with the TV. Contact Samsung's call center for assistance.

●

No: If the test pattern is properly displayed, select No. There may be a problem with your

external equipment. Please check your connections. If the problem still persists, refer to

the external device's user manual.

Sound Test



If you think you have a sound problem, please perform the sound test. You can check the

sound by playing a built-in melody sound through the TV.

If you hear no sound from the TV's speakers, before performing the sound test, make sure Speaker Select is set to TV

speaker in the Sound menu.

The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing

the MUTE button.

●

Yes: If during the sound test you can hear sound only from one speaker or not at all, select Yes. There may be a problem with

the TV. Contact Samsung's call center for assistance.

●

No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check

your connections. If the problem still persists, refer to the external device's user manual.

Signal Information (digital channels only)



Unlike analogue channels, which can vary in reception quality from 'snowy' to clear, digital (HDTV) channels have either perfect

reception quality or you will not receive them at all. So, unlike analogue channels, you cannot fine tune a digital channel. You can,

however, adjust your antenna to improve the reception of available digital channels.

If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength.

Continue to adjust the antenna until you find the best position with the strongest signal.

[550_Aus]BN68-01895D-02Eng.indb 21

English -

Source List

Edit Name

Self Diagnosis

►

Software Upgrade

HD Connection Guide

Contact Samsung

2009-09-16

11:12:45