❏ Ad Hoc mode (computer-to-computer mode) lets you
connect just one computer to the projector at a time; it's easy
to set up, and the only equipment you need is a computer
with a wireless (802.11g, 802.11b, or 802.11a) network card
or adapter, or a Macintosh with an AirPort
Extreme card. When you connect to the projector in this
mode, your connection to other wireless networks or devices
is broken; you can connect to the projector only.
❏ Access Point mode (infrastructure mode) lets multiple
computers access the projector at the same time and easily
trade off control of the projector. To use Access Point mode,
you need a wireless (802.11a, 802.11b, or 802.11g) access
point or an AirPort Extreme (or AirPort) base station, and
one or more computers with wireless network cards or
adapters.
Follow the instructions below for the mode you want to use.
Note: To connect to the projector over a wireless network, your
computer must be running Windows 2000 or XP. Your Mac must
be running Mac OS X 10.3 or later.
Access Point mode (infrastructure mode) is required to achieve
transfer speeds up to 54Mbp/s on an 802.11a/g network. Ad Hoc
mode (computer-to-computer mode) limits network connections to
11Mbp/s. This is a standard specification of 802.11g networking.
Using Ad Hoc Mode
To use Ad Hoc (computer-to-computer) mode, adjust your
projector and wireless card or adapter settings as described in
this section.
Configuring the Projector
1. Press the
button, then choose
Menu
.
Enter
2. Choose
Network Configuration
3. Choose
and press
Wireless LAN
or AirPort
®
and press
Network
and press
.
Enter
.
Enter
You see this screen:
4. Make sure
is selected for the Connection mode. If
Quick
not, use the
pointer button on the remote control to
highlight
, then press
Quick
5. If your network is using 802.11a, use the
on the remote control to highlight
to select it.
6. If your computer's network card supports an SSID or ESSID
name (see page 12), highlight the
, and enter a name. Note that the ESSID is case-
Enter
sensitive (if you enter the name in uppercase on the
projector, you must type it the same way on the computer
connecting to the projector).
Use the
pointer button to select individual letters; then
press
to input a character. To add a blank space or to
Enter
navigate backward and forward through the input text,
highlight the arrows and press
settings or capital letters, highlight the option and press
. When you're done, highlight
Enter
7. When you're done making these settings, select
select
Setup complete
you want to save the changes. Press
system.
Now you're ready to set up your computer to project wirelessly.
Go to "Configuring the Network Settings for Windows" in the
next section, or "Configuring the Network Settings for
Macintosh" on page 12.
3/08
PowerLite 1810p/1815p
to select it.
Enter
pointer button
, then press
802.11a
text box, press
ESSID
. To toggle symbol
Enter
and press
Finish
Return
, and then select
to confirm that
Yes
to exit the menu
Menu
PowerLite 1810p/1815p
Enter
.
Enter
,
11
-
Pagina afdrukken